Whether the ripple presents a concern depends on the type of circuit that the converter is powering but in most cases can be ignored. The other thing to watch for with DC-DC converters is that they are deceptively simple to design on paper, but difficult to physically construct. There are ...
In this paper, a new design of a non-isolated high-voltage gain DC/DC converter that operates at a reasonable duty cycle, by merging the dual boost converter with the switched inductor structure, is presented as a solution for the high-conversion ratio requirement. The proposed converter operat...
This paper introduces an optimized DC–DC converter that employs a modified switched inductor-capacitor technique to achieve ultra-high voltage gain for renewable energy systems. The development is based on adding one cell of modified switched inductor (MSL1) with series diodes interleaved with the ...
An integrated CMOS voltage-mode buck dc-dc converter with on-chip pulse-width modulation (PWM) technique of switching control is presented in this paper. Also, a micro-power bandgap voltage reference generator is developed for the dc-dc converter. The PWM scheme employs a pseudo hyperbola curve...
A monolithic current-mode CMOS DC-DC converter with integrated power switches and a novel on-chip current sensor for feedback control is presented in this paper. With the proposed accurate on-chip current sensor, the sensed inductor current, combined with the internal ramp signal, can be used ...
Cite this paper Lavanya, A., Vijayakumar, K., Jegatheesan, R., Divya Navamani, J., Arjun, M. (2021). A Family of Extendable Multitudinous Source DC-DC Converter with High Gain for Microgrid. In: Komanapalli, V.L.N., Sivakumaran, N., Hampannavar, S. (eds) Advances in Automa...
“soft” output characteristics. To build DC-DC converters with the desired performance, their topologies have been widely investigated and optimized. Aiming to obtain the optimal design of wide input range and high-gain DC-DC boost converter topologies for FCVs, a review of the research status ...
A DC/DC converter with parallel input and parallel output circuit topology is presented to achieve the main features of reduced switch count and medium power level compared with conventional parallel half-bridge resonant converter. The proposed converter has three resonant circuits to share load current...
Switched-capacitor DC/DC converter with resonant gate drive In this paper, a resonant gate drive is proposed to reduce switching losses and simplify control of switches in switched-capacitor (SC) DC/DC power convert... B Arntzen,D Maksimovic - IEEE 被引量: 116发表: 1996年 Switched-capacitor...
This paper presents an inductorless dual-output switched-capacitor DC–DC converter employing pseudo-three-phase swap-and-cross control (PTPSCC) and an amplitude modulation mechanism (AMM). The AMM circuit scales the amplitudes of the driving signals for the switches according to the loading conditi...