Dante is an audio networking technology developed by Audinate. Dante devices on the same network automatically detect each other. This can make setting up a system simpler and thus reduce complexity and potential errors. This guide focuses on network des
The DAN-1 card connects via standard CAT-5e or higher network cabling to a network switch. As a rule of thumb, a separate, dedicated Dante network is recommended for critical, high channel-count applications. The DAN-1 Dante network should not share the same network hardware as AVB or Cobr...
Dante is an audio networking technology developed by Audinate. Dante devices on the same network automatically detect each other. This can make setting up a system simpler and thus reduce complexity and potential errors. This guide focuses on network des
③Factory Reset Hold down the recessed switch while powering up. After at least 10 seconds, remove power then power up again normally to reset the network settings and name. This will delete any static IP address and revert to factory default (DHCP / zero-conf). ④DC input DC 12V connecto...
Gigabit network switch, network cable of CAT5e or better 6. D-sub 9-pin straight serial cable (male–female)* *Precautions for a serial cable: ・This is not required when you control the HA via the Dante network from the M7CL-48ES, the LS9, or the CL series. To control the HA ...
AtlasIED HPA-DAC4 Dante Accessory Card 产品说明书 Owner’s Manual HPA-DAC4 Dante ® Accessory Card AtlasIED.com – 1 –1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.Telephone: 800.876.3333 • Fax: 800.765.3435 HPA-DAC4Dante ® Accessory Card ...
Video: Dante Switch Configuration Guide for M4250 Switches Optimizing Dante and Audio-over-IP Installations with NETGEAR M4250 AV Line Ethernet Switches In the world of professional AV installations, a smooth, efficient, and reliable operation is key to delivering superior performance. As such, the...
Shure includes a two-port network switch within the ULX-D receiver, which can be configured to daisy-chain multiple units together, and enables Shure or third-party control (control on one port and Dante on the other). In this way, integrating multiple ULX-D systems into popular control ...
Digital FOH / Monitor split with Record / Playback and speaker management. The iDR-48 Monitor system is the clock master for the network. The iDR-16 is the FOH system receiving most of its inputs digitally via Dante. The main outputs from the iDR-16 are also sent to a Dante-enabled l...
and control data together over the Dante network protocol. A simple Ethernet connection allows the Network Microphone to communicate across an existing network of Dante-enabled devices and, with the mic’s integrated, programmable user switch, control any of those devices at the push of a button....