尊敬的华硕用户，您好：在调整BIOS设置时，遇到launch CSM选项灰色无法更改的情况，通常是因为系统存在安全启动（Secure Boot）设置的限制。为了帮助您顺利调整设置，请参考以下步骤进行操作：1. 开机时长按F2键进入BIOS设置界面。2. 使用方向键导航至【Secure】菜单，然后选择【Secure Boot Control】选项，将...
1.开机F2进入BIOS，进行设置：Boot->Launch CSM->Enabled Security->Secure Boot Control->Disabled ，按F10保存退出。2.F10保存退出后开机，按ESC，直接选择UEFI开头的光驱启动项就可以了。希望以上信息能够对您有所帮助！谢谢！若以上回复还是没有帮您解决您的问题，您可以登录华硕在线反馈：http://v...
I found that with CSM enabled I was getting constant Code 43 errors on the device under device manager in windows, I even went into save mode and tried deleting the drivers with DDU there to get windows to redetect on boot up but instead of getting the AMD device driver installed Windows...
I found that with CSM enabled I was getting constant Code 43 errors on the device under device manager in windows, I even went into save mode and tried deleting the drivers with DDU there to get windows to redetect on boot up but instead of getting the AMD device driver installed Windows...
The”Secure Boot Control”must be enabled by default, hit Enter, and selectdisabled. Now go to the”Boot”tab, which is next to the ”Security tab.” Highlight the”Launch CSM”option and hit enter to select enabled. Finally, save the settings by going to the”Save & Exit”tab. ...
首先建议您开机F2进入bios设置如下：Boot->Launch CSM->Enabled Security->Secure Boot Control->Disabled 如果CSM无法设置，建议您首先设置Secure Boot Control之后保存设置退出bios，然后重新进入设置CSM。然后您开机按ESC确认是否有其他的启动项，是否能够选择相应的U盘或者其他启动项启动。造成...
解决方法如下：1、开机的时候长按F2键进入BIOS界面，通过方向键进【Secure】菜单，通过方向键选择【SecureBootControl】选项，将其设定为Disabled”。2.通过方向键进入【Boot】菜单，通过方向键选择【LunchCSM】选项，将其设定为“Enabled”。CSM（兼容性支持模块）是BIOS上Boot选项里的一个下拉子项目（一些...
I found that with CSM enabled I was getting constant Code 43 errors on the device under device manager in windows, I even went into save mode and tried deleting the drivers with DDU there to get windows to redetect on boot up but instead of getting the AMD device driver installed Windows...
重装电脑后,电脑开机..重装电脑后,电脑开机一直进入BIOS,然后我把launch csm设置为enabled,不会进入BIOS了,但是又会出现reboot and select proper boot device,哥哥们
05.06【求助】华..csm will not be enabled if secure boot control is enabled .please disable secure boot control first.