最新版本是 CSA S806-2012(R2017) 。 CSA S806-2012(R2017)的历代版本如下: 0000年 CSA S806-2012(R2017) 标准名称:设计与纤维增强聚合物(FRP)建筑材料结构 适用范围: 本标准适用于使用纤维增强聚合物(FRP)材料进行建筑物结构设计与施工的指导,包括但不限于建筑结构的设计原则、施工工艺和技术要求。 该标准旨...
( Δ ) in the margin on the attached replacement pages: Revised Clauses 8.4.5.2 and 10.6.2.3 and Table 14 New None Deleted None CAN/CSA-S806-02 originally consisted of 187 pages (x preliminary and 177 text), each dated May 2002. It now consists of the following pages: May 2002 iii...
CAN/CSA S806-2002 适用范围 范围1.1 总则 本标准规定了建筑物中纤维增强聚合物 (FRP) 建筑部件和用 FRP 材料增强的建筑部件的设计和评估要求。它基于极限状态设计原则,并与加拿大国家建筑规范一致。本标准不适用于纤维增强混凝土 (FRC) 的设计,但第 7.3 条和第 13 条定义的 FRC/FRP 包层除外。注意:程序、测...
In this study, a novel reliability-based approach was utilized to quantify the reliability index associated with the slenderness limit to calibrate and propose optimized reliability-based slenderness limits for CSA S806 and CSA S6, for the first time. The method takes the advantage of artificial ...
These designs were made according to CAN/CSA-S806-02, Design and Construction of Building Components with Fibre-Reinforced-Polymers. To verify the design,... Brahim Benmokrane, , Ehab El-Salakawy, , Zoubir Cherrak, and , Allan Wiseman - 《Revue Canadienne De Génie Civil》 被引量: 18发表...
4. CSA S806-18防火墙标准:这个标准规定了建筑物中墙壁和隔离间隔等建筑物防火性能的最佳实践方法。 5. CSA A123.1-14内燃机安规:这个标准涵盖了燃气发动机、柴油机和其他内燃机等方面的安全标准。 总之,CSA标准是加拿大各领域专业人士必须遵循的重要规定,它有助于确保加拿大生产、消费和生活中的安全和质量。©...
4. CSA S806-18 防火墙标准:这个标准规定了建筑物中墙壁和 隔离间隔等建筑物防火性能的最佳实践方法。 5. CSA A123.1-14 内燃机安规:这个标准涵盖了燃气发动机、 柴油机和其他内燃机等方面的安全标准。 总之,CSA 标准是加拿大各领域专业人士必须遵循的重要规 定,它有助于确保加拿大生产、消费和生活中的安全和质量...
This paper presents an alternative approach for calculating the longitudinal strain parameter, εx, when using the CSA A23.3:19 torsion provisions for reinforced concrete members. The proposed method explicitly calculates εx as the average of the strain
The cracking and ultimate torque as well as the failure mode predicted using the CAN/CSA-S806-12 were compared with the experimentally observed ones. The CAN/CSA-S806-12 was found to be overly conservative. Thus, modifications were proposed to the current CAN/CSA-S806-12, whichwere found to...
CAN/CSA S806-2012(R2021)的历代版本如下: 2002年CAN/CSA S806-2002采用纤维增强聚合物的建筑构件的设计和施工 包括更新第 2,3,4,5 号 (2009) 范围1.1 总则 本标准规定了建筑物中纤维增强聚合物 (FRP) 建筑部件和用 FRP 材料增强的建筑部件的设计和评估要求。它基于极限状态设计原则,并与加拿大国家建筑规范...