Step 3: Create a bootable CD or DVD To create a bootable CD, you must use CD-recording software that unpacks the .iso file and burns it to a CD. Merely copying the .iso file to the CD will not work. Note The Oscdimg tool is not supported on an Itanium-based computer running Windo...
Include all components required for the bootable CD-ROM and any hardware devices on the target system. Create an ISO file of the run-time image using hd2iso. Use the ISO image to create a CD-ROM that is used to identify the CD-ROM device during the FBA phase. Boot the run-time ...
Step 4: Create a bootable CD-ROM This step describes how to put a Windows PE RAM disk onto a CD-ROM. This option requires that you create an .iso file by using the Oscdimg tool. On your technician computer, create an .iso file with Oscdimg. At a command prompt, type: ...
You must create an ISO image of the post-FBA run-time image in order to create a bootable CD-ROM. To create an ISO image of the post-FBA run-time image Open a command line. Navigate to the Windows Embedded\utilities directory. For example, by typing the following command: ...
If you prefer, you can create an image of needed files and then Create a Bootable CD-ROM instead of a bootable UFD. Hardware and Software Assumptions You have a reference device that meets the Requirements for an Embedded Device. A reference device has the same hardware configuration as a ...
With EaseUS Todo Backup you can create EaseUS Bootable USB, CD/DVD, and ISO Image. With the WinPE drive, you can recover your system, and back up files when the operating system crash. Besides, if you want to create a Windows 10 bootable USB, you can als
Create the iso for the bootable disk : oscdimg -n -bC:\winpe_x86\etfsboot.com C:\winpe_x86\ISO C:\winpe_x86\winpe_x86.iso Burn the iso file to a dvd or cdrom "dvdburn d: C:\winpe_x86\winpe_x86.iso" to burn the iso file to a DVD. "cdburn d: C:\winpe_x86\w...
2. Under the "Tools and Utilities" tab, click the "Create Bootable Media" button.3. Please specify the storage media and click the "Proceed" button in the window.USB boot device - Select a USB device. Export ISO file - Select path to save Emergency ISO file. Burn to CD/DVD - ...
7. Create a bootable recovery CD. Create a Bootable Recovery CD 8. Test the recovery CD. Boot the device with the recovery CD, and install the image. Test the Recovery CD 9. Once you have a CD that works flawlessly, you can duplicate it and distribute it with installation instructions....
Note: If you will use an external USB hard drive to save the system image, you can connect the same one to create the bootable device to enter Windows Recovery Environment (Windows will automatically create a new partition on the external USB hard drive). Select [Create]⑧, and the ...