a few days ago, my cpu suddenly got stuck at 800mhz, i tried to find the problem, according to my findings it isn't a thermal or windows power plan issue or something. The temps are fine and the power settings are all set to maximum performance. After searching on the internet i fou...
and sometimes it might stay stuck at 2600 MHz instead of 800 MHz. The CPU frequency seems normal when the device is idle, but it gets stuck at a certain value
May 3, 2015 1:14 PM in response to John Galt nope, it's just processor info. it says 2.2 even if you unplug battery. see picture in post- intel power gadget says it's 800... even in linux speedstep not working. only can force it to clock on 2.2mhz. mac os x sadly has no ...
I had the same problem with Dell latitude E6420 and CPU was stuck at 800mHz. I tried changing Bios, updating all chipset drivers and graphic drivers but could not solve the problem. It turns out a simple issue: the power adapter. I plugged in a different adapter other than the original ...
I'm really confused at this point, i really hope nothing is wrong with my motherboard or CPU, never seen this behavior before when the system is running Max power mode.tldr;C-States: Disabled, kinda fix the problem but i'm stuck in constant 4.7ghz mode.alsosetting Asus Multicore Enhanc...
After replacement, CPU not stuck at 0.80GHz anymore. regards, spetrov Was this reply helpful? Yes No pompierecattivo 2 0 0 New member 04-27-2019 10:03 AM Solve for me. https://h30434.www3.hp.com/t5/Gaming-Notebooks/CPU-stuck-at-800MHz-core-speed/td-p/6860019 Was this re...
Macbook pro 16 2019 cpu stuck at 1.0 ghz when using highly CPU-intensive apps Hi. I noticed time ago that my macbook pro (16'', 16gb ram, i7 2.6 Ghz 6-core) was very slow on intensive usage. I am a software engineer and found it normal to be a little bit slow sometimes, but...
It was stuck like this for about 15sec because I was trying to close Cinebench, but it wasn't responding and had to get task manager to kill it. Opened it up again, spiked the same way, but came down very quickly. And here's the screenshot of running Cinebench 2024 after 30sec ...
1. On both AMD systems that I tried this on ( AMD Turion X2 TL-50 and AMD Turion II N54L) CPU frequencies were stuck at 800Mhz and performance was pretty bad. I've only tried this on Intel systems that are running 3rd Generation Pentium or better, so I can't comment too much abo...
Overclocked the GPU (+220MHz core/+800MHz mem/+60% voltage)Validated the GPU in GPU-Z and compared benchmark test results to make sure it's not fake then did the same for the CPU.No matter what I do, it remains stuck rendering at 71 FPS (render speed is set to Maximum). Is ...