core on JTAG chainNo devices found on JTAG chain. Trying to find device on SWD.Info: Found SWD-DP dfzvzs 2020-07-17 07:10:45 EasyGo FPGA Coder Block 2022-05-19 09:16:05 不同DRAM Devices 的组织方式及其效果 这种组织方式的优势在于多个 Devices 可以同时工作,DRAM Controller 可以对不同 ...
方法1：将Testbench中的module名改为HEX4_tb，仿真即可通过，如下图所示：方法2：在quartus 的test...
开发板需要准备SD卡,卡中需要烧...串口调试软件上我选择的是Xshell6 当然你也可以使用别的串口调试软件,比如说:MobaXterm等此类软件。FPGA的开发工具企业用很多的大概就是Vivado。在我进行FPGA研发上我也使用
Device is MAXII cpld. But when run_msim_rtl_vhdl.do runs, vcom outputs Error:vcom-11 at top.vhd defined the library. # ** Error: (vcom-11) Could not find cpld_lib.cpld_pkg. Top.vhd describes the library define under the bellow. Quartus compilation is normal....
在使用IAR过程中,使用MSP430uif仿真中出现“could not find device(or device not suported)” 在使用IAR过程中,使用MSP430uif仿真中出现“could not find device(or device not suported)“。在网上看到说是复位电容太大导致的,我已经把复位电容改到了100pf了。应该不是这个原因了。还有没有其他的原因 敲子...
I'm running Ubuntu and I see the same same error: "Error: Could not find or load main class com.intel.bts.BtsApp" running any of the *.sh scripts in the board_test_system subdirectory of the devkit's examples. This is the default version of the bts launc...
Error while launching program could not find ARM device on the board for connection 'local' Check if the target is in: 1.Split JTAG - No operations are possible with ARM DAP 2.Non JTAG bootmode - Bootroom may need time to en...
Due to Arria® V GX, SX, GT, and ST device limitations, the parallel recovered clock from the CDR and deserializer can not be routed to the FPGA fabric. Resolution To work around this problem, you must deselect the "Enable rx_pma_clkout port" option in the Native PHY IP. Related ...
在Gradle中创建一个task后出现 Could not find method leftShift() for arguments错误 使用的Gradle5.1 自定义的Task结果使用了快速定义任务 << 问题出现的原因: 操作符 << 在Gradle 4.x中被弃用,并且在Gradle 5.0 被移除了。解决办法直接去掉 << 或者使用doLast 即可...解决...
After a fresh install of Vivado 2021.1 Standard, and trying both new and existing projects, it appears the vcomponents package from the XPM library cannot be found (error in post title). This, of course, results in any XPM components to not be recognized