针对您遇到的问题 "could not find a package configuration file provided by 'catkin' with any of",这通常是在配置ROS(Robot Operating System)环境时遇到的一个常见问题,特别是在使用catkin_make或cmake命令时。下面我将按照您提供的提示逐一解答: 1. 问题背景 这个问题出现在尝试使用catkin构建ROS项目时,系统...
By not providing "FindInferenceEngine.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "InferenceEngine", but CMake did not find one. Could not find a package configuration file provided by "InferenceEngine" (requested version 2.0) with...
最后,我们需要重新运行程序,以验证我们的解决方案是否有效。重新运行程序后,我们应该不再看到“Could not find a package configuration file provided by Python2 with any o”错误提示。如果问题仍然存在,那么我们可能需要重新检查前面的步骤,确保没有遗漏任何步骤。 类图 下面是一个示例类图,展示了本文中提到的一些类...
By not providing "FindInferenceEngine.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "InferenceEngine", but CMake did not find one. Could not find a package configuration file provided by "InferenceEngine" (requested version 2.0) with...
报错:Could not find a package configuration file provided by "tikicpulib" 发表于 2024-04-08 15:21:23191查看 运行sample/operator/MatMulCustomSample/KernelLaunch/MatMulInvocationNeo报错: canntoolkit 从7.0.0.alpha003升级到7.0.0_linux再升级到8.0.RC1.alpha003都不行,也export ASCEND_INSTALL_PATH。都...
CMake Error at /opt/ros/melodic/share/catkin/cmake/catkinConfig.cmake:83 (find_package): Could not find a package configuration file provided by "cv_bridge" with any of the following names: cv_bridgeConfig.cmake cv_bridge-config.cmake 解决: sudo apt-get install ros-melodic-cv-bridge ...
低版本protobuf与cmake问题:Could not find a package configuration file provided by "Protobuf" with any of the following names: ProtobufConfig.cmake 背景 如果使用Cmake编译caffe, 且使用低版本protobuf(如2.5),会报错cmake找不到protobuf。 解决思路:...
CLion编写Qt报错:could not find a package configuration file provide by “QT“ with any of the following 报错图如下所示: 可以看到实际上就是找不到QT 两个cmake文件,解决方法他也告诉我们了,就是设置一个CMAKE_PREFIS_PATH即可。解决方案是在硬盘里搜索Qt5Config.cmake文件找到存放路径,如下所示:...
Description Could not find a package configuration file provided by "RapidJSON" with any of the following names: RapidJSONConfig.cmake rapidjson-config.cmake Add the installation prefix of "RapidJSON" to CMAKE_PREFIX_PATH or set "RapidJS...
Could not find a package configuration file provided by "InferenceEngine" (requested version 2.0) with any of the following names: InferenceEngineConfig.cmake inferenceengine-config.cmake Add the installation prefix of "InferenceEngine" to CMAKE_PREFIX_PATH or ...