性能问题:适当调整relay-threads和max-bps参数。 Coturn 与 WebRTC 的 ICE 候选者机制是如何协作的? 1. ICE 候选者机制概述 Interactive Connectivity Establishment (ICE) 是 WebRTC 中用于实现 NAT 穿透的机制,分为三类候选者: 主机候选者:直接使用本地网络接口的 IP 地址。 服务器候选者:通过 STUN 服务器获取...
AI检测代码解析 # 网卡名relay-device=eth0#内网IPlistening-ip=172.17.8.72 listening-port=3478#内网IPrelay-ip=172.17.8.72 tls-listening-port=5349# 外网IPexternal-ip=47.92.25.238 relay-threads=500#打开密码验证lt-cred-mech cert=/etc/turn_server_cert.pem pkey=/etc/turn_server_pkey.pem min-port=...
#relay-threads=0 relay-threads=10 # Lower and upper bounds of the UDP relay endpoints: # (default values are 49152 and 65535) # # UDP中继端点的上下边界: # (默认是49152至65535) # #min-port=49152 #max-port=65535 # Uncomment to run TURN server in 'normal' 'moderate' verbose mode. #...
relay-device=eth0 # 中转网卡 listening-ip=10.2.6.47 # 内网IP tls-listening-port=5349 relay-ip=10.2.6.47 #内网IP external-ip=45.90.208.43 #公网IP relay-threads=50 lt-cred-mech cert=/etc/turn_server_cert.pem # 证书文件 pkey=/etc/turn_server_pkey.pem # 私钥文件 min-port=49152 max-port...
xxx.xxx.xxx # 公网IP relay-threads=50 lt-cred-mech cert=./turn_server_cert.pem pkey=./turn_server_pkey.pem pidfile=”/var/run/turnserver.pid” min-port=49152 max-port=65535 user=users:123.com # 用户名密码,创建IceServer时用 cli-password=123.com 1.6 启动turnserver 代码语言:javascript...
-m,--relay-threads<number>Number of relay threads to handle the established connections (in addition to authentication thread and the listener thread). If explicitly set to 0 then application handles that traffic in a single thread. If not set, then the default policy is employed. The default...
#relay-threads=0 # Lower and upper bounds of the UDP relay endpoints: # (default values are 49152 and 65535) # min-port=50001 max-port=50050 # Uncomment to run TURN server in 'normal' 'moderate' verbose mode. # By default the verbose mode is off. verbose # Uncomment to run TURN se...
(before Linux kernel 3.9), the number of UDP threads is always one threads per network listening endpoint - unless "-m 0" or "-m 1" is set. --min-port Lower bound of the UDP port range for relay endpoints allocation. Default value is 49152, according to RFC 5766. --max-port Upper...
-m, --relay-threads Number of the relay threads to handle the established connections (in addition to authentication thread and the listener thread). If explicitly set to 0 then application runs relay process in a single thread, in the same thread with the listener process (the authenticat...
-m, --relay-threads Number of the relay threads to handle the established connections (in addition to authentication thread and the listener thread). If explicitly set to 0 then application runs relay process in a single thread, in the same thread with the listener process (the authenticat...