Destabilized breakdown damage cannot be reversed, though metals may be spiffed up. Limited cracks have been successfully welded, but crystallized goo no. Also consider that garment conservators store in acid free boxes or fabrics for long term, but not in contact with wood which is acidic. So ...
L Zhang,F Zhu,R Tang - 《Frontiers of Energy & Power Engineering in China》 被引量: 29发表: 2009年 SCC and Irradiation Properties of Metals under Supercritical-water Cooled Power Reactor Conditions The supercritical-water cooled power reactor (SCPR) is expected to be an innovative nuclear power...
S. Effects of Metals, Metal Oxides and Metal Hydroxide on the Leaching of Simulated Nuclear Waste Glass. Radiochim. Acta 79, 199–206 (1997). Article CAS Google Scholar Burger, E. et al. Impact of iron on nuclear glass alteration in geological repository conditions: A multiscale approach....
Most metals naturally corrode in an engineering environment and form corrosion products. The corrosion products can be either soluble or insoluble in the aqueous solution. The insoluble corrosion products (ICP) could have profound effects on the corrosion kinetics of the concerned metal. In this study...
GIF002–00, 1 December,... N. Birks Introduction to the High-temperature Oxidation of Metals (1983) S. Floreen et al. There are more references available in the full text version of this article. Cited by (56) Experimental basic factors in the production of H<inf>2</inf> via ...
Another quality of EIS is its high measurement sensitivity, which makes the technique an attractive advantage for detailed information that can be obtained from the system in study. For example, EIS was used to evaluate the properties of thin oxide films formed on metals, monitoring superficial deg...
of the Ninth Intl. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, F. P. Ford, S. M. Bruemmer, and G. S. Was, eds., The Minerals, Metals, and Materials Society, Warrendale, PA, pp. 207-213, 1999....
The corrosion behavior of Ni-Mo alloys containing up to 40 wt.% Mo was studied over the temperature range of 550–800C in a mixed gas of H2/H2O/ H2S. The scales formed on all alloys contained only sulfides and were doublelayered. The outer scale was single-phase Ni3S2. ...
36. ASTM G31-72: standard practice for laboratory immersion corrosion testing of metals. Published: American Society for Testing and Materials (Place published, 2004). 37. Zong, Y. et al. Comparison of biodegradable behaviors of AZ31 and Mg–Nd–Zn–Zr alloys in Hank's physiological solution...
In addition to iron-based alloys, silicates have been reported to impart corrosion inhibition to other metals such as aluminum, zinc, and lead. Properties such as low weight, innocuous environmental effects, low cost, and good compatibility with concrete components have motivated many researchers to...