具体配置如下: it168#copy tftp running-config address or name of remote host[]? 129.0.0.3 source filename []?it168-confg destination file name [running-config]? accessing tftp://129.0.0.3/it168-confg loading it168-confg from 129.0.0.3 (via fastethernet 0/0): !!! [ok-624 bytes] 624 ...
@文心快码copy config from text file to cisco switch 文心快码 可以将配置文件从文本文件复制到思科交换机。 要将配置文件从文本文件复制到思科交换机,通常可以使用TFTP(Trivial File Transfer Protocol)或其他文件传输协议。以下是一个基本的步骤指南: 确保交换机和TFTP服务器在同一网络: 确保你的计算机(作为TFTP...
2 、copy running-config tftp 这个命令是将 RAM中正确的配置文件拷贝到 TFTP服务器上,我们强烈推荐网络管理员 这样做,因为如果路由器不能从 NVRAM中正常装载配置文件,我们可以通过从 TFTP 中拷贝 正 确的配置文件。 it168#copy running-config tftp address or name of remote host []? destination file name ...
I have a cisco 3750 swicth which i want to load a new ios to but unfortunately there's no enough space on the flash. This means that i need to backup the cureent (old) ios to my tftp server but the command keeps failing. It always gives 'No such file or directory' error . The ...
VNPSWITCH#$/c3750-ipbase-mz.122-25.SEB4/c3750-ipbase-mz.122-25.SEB4.bin tftp Address or name of remote host []? 172.19.2.214 Destination filename [c3750-ipbase-mz.122-25.SEB4.bin]? %Error opening flash:/c3750-ipbase-mz.122-25.SEB4/c3750-ipbase-mz.122-25.SEB4.bi ...
Here is an example. Let’s say that we want to transfer the image file from the FTP server to a Cisco switch. We can do this using the following set of commands: SW1(config)#ip ftp username tuna SW1(config)#ip ftp password peyo ...
Then copy the image from the external server to the switch using switch# copy tftp://tftpuser@<IP_TFTP>/path/to/aci-image.bin bootflash: vrf management.(Assuming the TFTP server is being used and IP_TFTP is the IP address configured on the T...
find_prompt()) Tftp_server = "10.10.12.145" output = net_connect.send_command_timing(command1) if 'Address or name of remote host' in output: output += net_connect.send_command_timing(Tftp_server) if 'Source filename' in output: # switch back to send_command() here as this might ...
I’ve spent a few months looking for an alternate solution to SugarySync, i’ve triedOwnCloudwhich turned out to be a real disaster and landed onSeafile. While OwnCloud has a nicer GUI, it’s horribly buggy. The desktop sync client is slow and resource intensive. Plus I ran into an ...
If you use the word "flash:" which is the true way to refer to the file system, the router rejects the command -- it isnt an option. That having been said, you did download a file from the tftp server and the router did send it to disk0: Why? Why not sup-bootdisk: or bootfl...