We have seen that oscillators are typically specified in terms of phase noise, but in order to relate phase noise to ADC performance, the phase noise must be converted into jitter. In order to make the graph relevant to modern ADC applications, the oscillator frequency (sampling frequency) is...
has jitter in the time domain, corresponding to phase noise in the frequency domain). The spectrum shows the noise power in a 1-Hz bandwidth as a function of frequency. Phase noise is defined as the ratio of the noise in a 1-Hz bandwidth at a specified frequency offset, f m, to the...
Converting Oscillator Phase Noise to Time Jitter.pdf,MT-008 TUTORIAL Converting Oscillator Phase Noise to Time Jitter by Walt Kester INTRODUCTION A low aperture jitter specification of an ADC is critical to achieving high levels of signal-to- noise ratio
ADI工程师Walt Kester的Converting Oscillator Phase Noise to Time Jitter,讲述如何通过PLL相噪计算得到jitter点赞(0) 踩踩(0) 反馈 所需:1 积分 电信网络下载 在ol(openlayers)中进行两个多边形要素的拟合,即通过动画的形式从一个多边形过渡到另一个多边形 2025-02-12 08:26:34 积分:1 Xftp-7.0.0140p....
Converting Oscillator Phase Noise to Time Jitter 来自 ResearchGate 喜欢 0 阅读量: 165 作者: W Kester 摘要: A low aperture jitter specification of an ADC is critical to achieving high levels of signal-tonoise ratios (SNR). (See References 1, 2, and 3). ADCs are available with aperture...
total jitter). The LTC6957 also features a proprietary, selectable, input stage bandwidth-limiting feature, which substantially improves the additive phase noise for slow slewing signals by up to 3dB to 4dB. Features n Low Phase Noise Buffer/Driver ...
MT-008 TUTORIAL Converting Oscillator Phase Noise to Time Jitter by Walt Kester INTRODUCTION A low aperture jitter specification of an ADC is critical to achieving high levels of signal-to- noise ratios (SNR). (See References 1, 2, and 3). ADCs are available with aperture jitter ...
相噪与抖动转换Converting Oscillator Phase Noise to Time Jitter.pdf,MT-008 TUTORIAL Converting Oscillator Phase Noise to Time Jitter by Walt Kester INTRODUCTION A low aperture jitter specification of an ADC is critical to achieving high levels of signal-t
to said double-sideband amplitude-modulation signal; a complex multiplier connected for multiplying said complex response to said double-sideband amplitude-modulation signal by a complex carrier the frequency of which equals said offset frequency, to generate an in-phase synchronous detection response and...
conventional over-sampling IC can be used for over-sampling. Hence the method can be easily applied to hardware and ICs. In addition, input signals with jitters are processed by changing th e conversion rate, the clocking precision is increased. Hence the converter also serves as a jitter ...