文件: Xbox_360_Modular_Controller_Holder_v1.stl 说明: 3d打印模型云检查是爱给网根据自动化脚本在stl模型查看器中截图生成,主要用于辅助判断预览图和实际模型的一致性。 提示: 由于云检查并不是人工进行的,此项检查存在诸多因素(如视角设置不佳等)导致约有1%的模型还不能很好的展示,因此截图并不能完全代表模...
A simple Steam Controller holder, to be secured to a wall or furniture with mounting tape. STEP file included. Print Settings Rafts: No Supports: No Notes: To achieve the exposed hexagon pattern, I oriented the part on it’s side and used 10% Honeycomb infill with no top solid or bottom...
Print these files (do only one copy of the "2x" files if you just want one paddle). I used PLA, but ABS should work well, too. 2x paddlemain.stl 2x paddleknob.stl 1x paddleconverter.stl 1x pcbholdernarrower.stl 2x buttoncap110.stl (optional) 1x 12.stl (optional; print in a d...
In the case of the NiCad holder, attach this to the Camera stand. Fit both the camera stand and the buffer to the front of the chassis using M3 nuts and 2 x M3 x 10mm bolts. Fit the chosen battery box, either NiCad or LiPo. The NiCad box fits over the rear skid fixing, for ...
usb_holder.stl new lever with angly contact Apr 9, 2023 Repository files navigation README License Combat Cross Button-style controller with a lever: it's just a big D-Pad Lots of garbage in there, but the main project file is called dpad_layout.blend. Parts to print are: "bed" collec...
If this option is selected, 3 mm LEDs should be mounted at the back of the LED holder using 3 mm LED mounts and connected directly to their channel pins on the stimulator board (by default channels 5, 6, 7 & 8). As the LEDs are directly connected to an LED driver, no resistors ...
爱给网提供海量的爱给模型库资源素材免费下载, 本次作品为rhino,stl 格式的带usb支架的可堆叠游戏手柄控制器支架(Stackable gamepad controller stand with a usb holder), 本站编号104309305, 该爱给模型库素材大小为12m, 该素材已被下载:8次, 更多精彩爱给模型库素材,尽在爱给网。
1 x 6V AA Battery Holder:https://www.banggood.com/custlink/mm3ytG0q9a 4 x 1.5V AA Battery 4 x M3 Phillips Pan Head Screw A lot of Jumper Wires Electronic components needed for the FPV setup: 1 x FPV Receiver:https://www.banggood.com/custlink/3vGY5G42LE ...