"contains a file system with errors" 错误信息通常表明你的文件系统存在损坏或不一致的问题。以下是对这一问题的详细解答: 一、具体含义和上下文 当你在启动 Linux 系统时遇到 “contains a file system with errors, check forced” 的错误信息,这通常意味着系统检测到文件系统存在错误,需要强制进行检查和修复。
1、解决参考一 Press enter for maintenance (or type Control-D to continue): /dev/sda3 contains a file system with errors, check forced. /dev/sda3: Inodes that were part of a corrupted orphan linked list found. /dev/sda3: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a...
1、解决参考一 Press enter for maintenance (or type Control-D to continue): /dev/sda3 contains a file system with errors, check forced. /dev/sda3: Inodes that were part of a corrupted orphan linked list found. /dev/sda3: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a...
2.输入: fsck.ext4 -C0 /dev/sda1 会进行硬盘检查,每次遇到检出出错的地方,有提示修复或确认,只需一直输入y或者回车即可。 修复完成后,输入reboot重启,即可完成修复
linux无法启动,contains a file system with errors, check forced错误 系统当机,重启后提示如下报错: 原因是:由于系统部分文件丢失,造成磁盘检测过不去,系统无法启动。 解决方法: 1、进入修复模式: 2、运行fsck.ext3,如果是其他文件系统,请先umount 3、总共会进行5个步骤,执行时间和设备中文件数据的大小有关。
linux系统启动报错:[contains a file system with errors, check forced]的解决方法参考 1、解决参考一 Press enter for maintenance (or type Control-D to continue): /dev/sda3 contains a file system with errors, check forced. /dev/sda3: Inodes that were part of a corrupted orphan linked list fo...
系统无法启动,contains a file system with errors, check forced错误解决方法 原因是:由于系统部分文件丢失,造成磁盘检测过不去,系统无法启动。 解决方法: #umount /dev/hda2 #fsck.ext3 -y /dev/hda2 下面回答全部是yes就ok了 然后 #reboot就ok了
英文的意思；dev/hda1包含有错误的文件系统，强制检查。dev;设备文件。 hda1；硬盘第一个分区。你的硬盘C(第一个分区)包含有错误的文件系统!(系统文件已破坏，有病毒或有木马）请重做一个系统！
ubuntu系统启动报错:[contains a file system with errors, check forced]的解决方法 运行Ubuntu6.04时出现错误: /dev/sdb1 contains a file system with errors, check forced. 刚开始比较慌,以为系统崩溃了,要重装呢!从网上查了半天,试了几次,用的是这种方法修复成功的: ...
mapper/pve-root: recovering journal,/dev/mapperpve-root contains a file system with errors, check forced. inode 3934272, end of extent exceeds allowed value, unexpected inconsistency; run fsck manually.fsck exited with status code 4,the root filesystem on /dev/mapper/pve-root requires a manual...