Lenovo datacenter Support Home – learn about your datacenter device, troubleshoot, check warranty, order or repair status, upgrade software or contact us
PCIe: Gen3 Width: x8 OSDistribution: RHEL7.0 kernel3.10.0-105.el7.x86_64 VM (Guest OS): RHEL6.4 VM MTU: 1450 Mellanox 40GbE Adapter P/N: MCX354A-FCCT Driver version: MLNX_OFED_LINUX-2.2-0.0.6 ConnectX Firmware: 2.31.2600
Mellanox ConnectX-3 ConnectX-3 Pro 的 Red Hat Enter Red Hat Enterprise Linux (RHEL) 7.5-ALT Driver User Manual
Make sure that the Firmware for the card is aligned to the WinOF driver. Refer to the WinOF driver Release notes for supported Fimware. 3. Install Hyper-V Role on the server. Click on Server Manager -> Manage-Add Roles and Featuresand set the following: ...
Dual QSFP ports HPE Flexible LOM Adapter based on ConnectX-3 Pro technology Support PCI Express 3.0 x8 Single or dual port FDR InfiniBand Single or dual port 10/40Gb Ethernet FDR IB on port 1 and Ethernet on port 2 Support the following H...
2.4.2 Downloading Firmware 1. Retrieve device's PCI slot (i.e. pci0:x:0:0). Run: #> mst status 2. Verify your card's PSID. #> flint -d pci0::0:0 q 3. Download the desired firmware from the Mellanox website. 12 Mellanox Technologies Rev 3.4.2 Installation http://www....
MCX354A-FCBT ConnectX-3平台,PCIe 3.0 x8适配器,单端口QSFP,56Gb/s FDR或40/56Gb 以太网 MCX311A-XCCT ConnectX-3 Pro,PCIe 3.0 x8,单端口QSFP,10Gb 以太网 MCX312B-XCCT ConnectX-3 Pro,PCIe 3.0 x8,双端口QSFP,10Gb 以太网 MCX313A-BCCT ConnectX-3 Pro,PCIe 3.0 x8,单端口QSFP,40/56Gb ...
3. Check if SR-IOV is enabled in the firmware. mstconfig -d <device pci> q Example: # mstconfig -d 00:06.0 qDevice #1:Device type: PCI device:ConnectX3Pro 00:06.0Configurations: SRIOV_EN NUM_OF_VFS LINK_TYPE_P1 LINK_TYPE_P2 LOG_BAR_SIZE BOOT_PKEY_P1 BOOT_PKEY_P2 BOOT_OPTION_...
This dude said he flashed el cheapo CX3s with PRO (FCCT) firmware, but not sure if any improvement over FCBT with non-pro hardware (interesting that it works, though): https://forums.servethehome.com/index.php?threads/mellanox-connectx-4-re-flash-to-100gbe.19399/ Last edited:...
If the hardware is identical I'd be happy to crack the firmware tool and try flashing Pro firmware on a non pro. Also, I can't get my workstation to post with a CX-3 installed. This is the same machine I've had a CX-2 in for the last ye...