The pin (4) dimensions at both two ends allow for elastic deformation of the pin where they contact the connecting rod eye. The bearing (3) has an oval cross-section within the connecting rod eye. The smallest eye diameter (D) allows play with the gudgeon pin. The larger diameter ...
Subsequently, the tolerances over the dimensions and the stock removal on the machining operation are also derived. Process capability tolerancing of connecting rod Based on the process capability improvement studies, the identified critical-to-quality characteristics in the machining of connecting rod and...
ing connecting rod pivoted to said crank and of a length ranging from 3 to 5 times the radius of said crank, a driven crank journalled in said frame to turn about a fixed axis, a driven connecting rod
In the drawing figures, dimensions may be exaggerated for clarity of illustration. It will be understood that when an element is referred to as being “between” two elements, it can be the only element between the two elements, or one or more intervening elements may also be present. Like...
The cover and the cup have dimensions, such that, when the cup is placed on the cover, the cap is moved in rotation around an axis normal to median planes of the domes to coincide the openings and seal the openings while not sealing a part of the openings at center of dome apexes. ...
rod1through which the pin14passes have dimensions greater than the diameter of this latter, so as to leave play between the male rod1and the pin14permitting the mentioned relative movements of translation and rotation of the rods1,2. The pin14comprises in its lower portion directed toward the...
As previously noted during the description of corner supports26and31, it is possible to stack completed single trays, each one having its own floor panel23. This arrangement is illustrated in FIG. 21 and a careful study of this drawing figure will reveal the differences in the stack of three...
means located at the discharge end of said frame for drawing a metal strip therefrom, a pair of aligned jaws one located above and one located below the path of travel of the strip and spaced between the discharge end and the supply end of said frame, said jaws being displaceable toward ...