To connect to the management interface using a hostname (http://hostname:8080), add the appliance hostname and IP address to your DNS server database. P1 and P2 (optional) Available for outbound management services traffic but not administration. Enable Use M1 port ...
BACnet/IP uses IP/UDP broadcast messages to communicate on local subnet. If two BACnet/IP devices are on different subnetworks (VLans, NAT Routers, etc…) and need to communicate with each other, a BBMD device is needed to facilitate sending and rebroadcasting the messages on the different ...
on a different subnet, then (1) I was able to ping the nexus10 from my desktop, and (2) ADB connected over TCPIP OK. So my conclusion is that my desktop/router/nexus10 had some bizarre routing incompatibility when on the same subnet, when disappeared when they were on different ...
I was searching a lot about firewall and NAT rules but I can't find anything that will help me. In the picture cut-out area is the external address. Let's say it's 2.2.2.2 Traceroute image So I want employees from other rooms to be able to connect to VPN from My...
ScenarioConnect your on-premises network to the cloud over two connections that are terminated at different locations in the same region and work in load balancing mode.
After you configure Remote Gateway on the console, you need to configure the IP address on the interface of the on-premises device. CAUTION: The IP addresses of the local gateway and remote gateway must be in the same IP address range. Generally, an IP address range with a 30-bit mask...
Select Use static address pool. Type the start of the IP address range in the Begin box, type the end of the IP address range in the End box. Note Configure a pool of static IP addresses on a different network segment than the network segment on which the internal LAN ex...
GatewaySubnet: 10.1.255.0/27 GatewayName: VNet1GW Public IP: VNet1GWIP VPNType: RouteBased Connection(1to4): VNet1toVNet4 Connection(1to5): VNet1toVNet5 (For VNets in different subscriptions) ConnectionType: VNet2VNet Values for TestVNet4: ...
Configure an enterprise subnet to automatically assign IP addresses to internal users. # Configure an IP address for LAN-side interface GE0/0/1 on the branch's RU-5G and configure the DHCP function. [RU-5G] dhcp enable [RU-5G] interface...
The IPv4 address of the VBR on the user side. 116.62.XX.XX PeeringIpv6SubnetMask string The subnet mask for the IPv6 addresses on the user side and on the Alibaba Cloud side. Both IPv6 addresses must belong to the same subnet. 2408:4004:cc:400::/56 PhysicalConnectionId string The ID...