This device sits on your desk and plugs into the computer's USB port. Inside the docking station, you'll find SATA connectors (and sometimes IDE/PATA connectors) that the disk drive can be plugged into. The drives essentially slide into the docking station upright, providing access to the c...
2. Locate theSATA portson the motherboard: These are typically located along the motherboard’s edge and are labeled asSATAorSATA III. 3. Using theSATA cable, connect the hard drive to themotherboard: Connect the hard drive to one end of the SATA cable and the motherboard to the other....
If you want to connect your old hard drive to a desktop computer, then you can do so directly as long as you’re fine with some tinkering and have an available IDE or SATA port on your motherboard. Here’s what you need to do: Remove the old hard drive from the computer it’s cu...
Plug one end of a SATA data cable into the smaller L-shaped connector on the hard drive, and plug the other end into one of the SATA controllers on your computer's motherboard. The SATA controllers are usually labeled SATA1, SATA2 and so on. Replace the side panel, reconnect the compu...
I'm using the following code to open and connect a TCP socket:prettyprint 複製 unsigned int Ip32; int Socket = WSASocket(AF_INET, SOCK_STREAM, IPPROTO_TCP, NULL, 0, WSA_FLAG_OVERLAPPED); memset((char *)&ServerAddress, 0, sizeof(sockaddr_in)); inet_pton(AF_INET, "192.168.14.2",...
Step-2:Close the power supply going to the computer. Step-3:Unplug all the cables and accessories. Change the hard disc drive connecting the port to the motherboard. Step-4:Plug in all the cables following the layout as same as it was before. ...
What are the advantages of using a SATA to USB adapter to connect a desktop hard drive to a laptop or another computer? Comments (26) Ahsan 11.05.2021 08:31 # Sir i have a p4 tower computer, which has only IDE hard drive cables, and i want to add a sata hard drive in it, ...