Executes the command without additional prompting for command confirmation. Usage Guidelines The system MAC address (6 bytes) and system priority (2 bytes) combine to form the system ID. A system consists of a packet processing card and its associated QGLC or ...
The stored address is NOT used, and the address found is never stored. •Pairing Mode (SM,6)—In this mode, the module attempts to connect with the remote device matching the store remote address. You set the remote address using the SR command. Note: In all master modes, the mo...
The Command Link Control Word (CLCW) for the virtual channel used by the hardware telecommands is generated automatically and transferred to the telemetry encoder. The hardware commands do not require any software and can therefore be used for critical operations. 1.4 Realization The telemetry ...
• For the ACT-USER command, no error code is transmitted except to convey that the login is granted or denied. According to Telcordia TR-835, Appendix A, Section A.2, "... the error codes corresponding to ACT ... do not apply to the ACT-USER command because this command requires ...
However, could there be an option to display numbers past 10, yet still not number tray icons? I wrote an AutoHotkey script to map Ctrl-Win-{F1~F12} to activating the 11th~22nd window in the taskbar, because 10 windows is just not enough. ...
If it is not installed in accordance with Cisco's installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the ...