The fitting has an anti-siphon device (1-3) set below the level of the upper edge (22) of the bath. The anti-siphon device is in the form of a free flow stretch (2) of at least 20 mm laterally off-set above a drain funnel (14) or next to the overflow hole (20) between ...
The thermostat fitting integrated in the outflow head (16), consists of two removable subassemblies, a thermostat control member to one side of the overflow hole and a subassembly (80) with three hydraulic plug and socket connections. This subassembly contains ceramic washers (84), an insert ...
34 .to the supply and waste pipes respectively as well as to connect up the bath waste and overflow. To allow: the passage of these conduits between, the edges of the bath- and basin the edge of the bath is preferably cut-away as shown at 42 :(Fig. 6). Iri the case where the ...
The anti-siphon device is in the form of a free flow stretch (2) of at least 20 mm laterally off-set above a drain funnel (14) or next to the overflow hole (20) between the back of the bath tub and its tile cover. The mixer supply nozzle and the re-entry or diversion bore (...
The water mixer for the bath is arranged under the upper edge of the fitting. The security against back flow uses a separator with three chambers built in the form of a cartridge, for mounting under the level of the bath rim. A membrane (1) in the discharge valve (2) is influenced ...
A valve in the junction directs water from the drain pipe to the return pipe but not to the waste pipe while allowing overflow water to flow into the waste pipe. After the bath has been used, the valve may be opened to drain the bath, drain and return pipes to waste.The designation ...
Combined bath mixer pop-up waste and overflowPan, Chia-chen
The combined bath overflow and single-lever mixer feed fitting has a temperature setting for the mixed water through a rotating grip (55) in the covering hood (7) at the bath side. The grip, which operates a slide (56), gives the water mixing action, and turns the water on and off....
The combined bath overflow and single-lever mixer feed fitting has a temperature setting for the mixed water through a rotating grip (55) in the covering hood (7) at the bath side. The grip, which operates a slide (56), gives the water mixing action, and turns the water on and off....
Overflow openings d<6>, d<7> and a waste opening d<1> and corresponding openings a<2>, a3 are respectively provided in the sleeve D and basin &c. A, the former being provided with a head d<4> having a projection d<5> coacting with a recess a4 in the edge of the basin &c....