Combined Air Operations Center - Experimental Combined Air Operations Center 3 Combined Air Power Transition Force Combined Air Terminal Operation Combined Airlift Office combined airspeed indicator Combined Alarm-Status Monitor Combined All-Source Intelligence Center ...
In this paper, a combination of 3D computational model simulations and experimental observations is used to provide important mechanistic insights into different processes involved in the contraction of blood clots. Model simulation results quantify microscale mechanisms of platelet–fibrin fiber interactions ...
Mechanical ventilation was initiated with a tidal volume of 6 ∼ 8 ml ∙ kg–1 in air-oxygen mixed gas (60% oxygen) and a respiratory rate of 12 ∼ 15 per minute to maintain EtCO2 between 35 and 40 mmHg. General anesthesia was maintained with sevoflurane inhalation at 0.5...
Steady BEM is applied to estimate the magnitude of aerodynamic loads on the rotor. BEM is based on the conservation of mass and the axial and angular momentum balances. Air is assumed to be incompressible and inviscid and the incoming airflow is axisymmetric with respect to the rotor. In our...
Collected server data such as the main-board temperature can be used to maintain the operation environment, for exam- ple, the room airflow. Also, non-fatal hardware error status data such as correctable memory er- rors can indicate the need to replace a unit before it fails. Therefore, ...
We conducted an experimental demonstration of hardware-in-the-loop training using a prototype synaptic device-based simulation environment. This environment includes a tested array of ZIF-67 synaptic transistors with a conductance response. The purpose of our experiment was to verify the efficacy of ...
integrated train and airplane products and facilitate connections between the country’s main stations, airports and ports, while also focusing on the development of new forms ofurban air mobility. ITA Airways has also signed a memorandum of understanding with FS to create mul...
Unfortunately, there is a lack of relevant experimental data with which to compare the predictions. In future work, it would be very useful to perform experiments on a similar continuous spill case in order to assess and validate both the simplified predictive equations and the simulation model. ...
23a. The pores inside of the HE material, as well as the surroundings of the disk are filled with air. The HE material is detonated at the center of the disk. Similar to what was observed in the previous example, the presence of the pores generates a complex behavior inside of the HE...
is a closest-packed arrangement of a single fiber at the center surrounded by six fibers, with twelve fibers forming the perimeter. The fibers are mapped to the spectrometer end, such that the seven center fibers in the demultiplexer end are at the center of a linear arrangement of fibers (...