and is dissolved after adding 5 mL of alcohol. • B. IDENTIFICATION TESTS—GENERAL, Chloride 〈191〉: A so- lution of it in a mixture of equal volumes of water and alcohol meets the requirements. • C. rU = peak area of each homolog from the Sample Analysis: Dissolve the residue...
and 98 mL of water.USP Reference standards ⟨11⟩— Extract this mixture as described for the Sample solution, andUSP Sodium Butyrate RS dilute the combined extracts with chloroform to volume.Sample solution: Dissolve 20.0 g of Sodium Chloride in 100Identification—mL of water, and add 10 ...
Identification— It responds to the tests for Calcium and Chloride. Bacterial end toxins— It contains not more than 0.2 USP End toxin Unit per mg of calcium chloride. pH: between 5.5 and 7.5 in the undiluted Injection, except where the concentration is greater than 1 in 20, in which case...
Identification Pass test Pass test Acidity and Alkalinity Pass test Pass test Heavy metals (as Pb) ≤mg/kg 5 -- Iodide and/or Bromide Pass test Pass test Loss on drying, ≤% 1.0 1.0(105 °C, 2hours) Sodium Pass test Negative Arsenic (As) ≤ppm -- 3 Lead (Pb) ≤ppm ...
Identification Passes NH4 and Cl tests Test Solution (10% w/v in water) Clear and Colorless Assay as NH4Cl 99.0% minimum pH (5% w/v in water) 4.5 to 5.5 Sulphate (SO4) 0.03% maximum Iron (Fe) 0.0002% maximum Residue on Ignition (as Sulphates) 0.3% maximum Calcium (Ca) 0.04% maxim...
IdentificationPasses NH4 and Cl tests Test Solution (10% w/v in water)Clear and Colorless Assay as NH4ClNLT 99.0% pH (5% w/v in water)4.5 to 5.5 Sulphate (SO4)NMT 0.03% Iron (Fe)NMT 0.0002% Residue on Ignition (as Sulphates)NMT 0.3% ...
Analysis: Transfer the Sample, with the aid of 35 mL of Standard solution: 4 mg/mL of benzalkonium chloride water, to a glass-stoppered, 250-mL conical separator from USP Benzalkonium Chloride RS and water containing 25 mL of methylene chloride. Add 10 mL of Sample solution: 4 mg/mL of...
Gentamicin Sulfate in 0.9% Sodium Chloride Injection is a sterile, nonpyrogenic solution of Gentamicin Sulfate, USP in water for injection with 9 mg/mL sodium chloride (NaCl) to provide isotonicity. The solution is intended for intravenous use and requires no further dilution. pH may be adjusted...
a included for identification purposes only. b 2-hydroxypropyltrimethyl ammonium chloride. specific tests• bacterial endotoxins testá85ñ:nmt 25.0 usp endotoxin units/mg of bethanechol chloride• phá791ñ:5.5–7.5• other requirements:it meets the requirements in injections and implanted ...
to a 1000-mLvolumetric flask,dilute with water to volume,and mix.(Retain a portion of the filtrate for use in theIdentificationtest.)Transfer 5.0mLof the resulting solution to a 100-mLvolumetric flask,add 2.0mLof sodium chloride solution (1in 5)and 1.0mLof hydrochloric acid,dilute with ...