Flywheel Flexplate Torque Specs The flywheel flexplate bolts have 60 foot-pounds of torque. Other Camshaft Torque Specs The 0.375-inch bolts on the rod connecting the pistons to the crankshaft have 50 foot-pounds of torque, while the 0.4375-inch bolts have 67 to 73 foot-pounds of torque. T...
Pass #1: The car ran cleanly all the way to 7200RPM (redline) in each gear, putting about 500hp to the rear wheels (about 660hp to the flywheel). The plugs were checked and they looked lean so we bumped the carb jetting from 83/90 to 86/93 for the next pass. Pass #2: The ca...
Remove the six 11/16 flywheel bolts using the 11/16 socket. The breaker bar may be needed to break these bolts loose This provides more room to access the rear main cap. Aggiungi un commento Aggiungi un commento Passo 4 Remove the two 5/8 rear main cap bolts. Gently tap the sid...
The crank shaft on the LS series engines is internally balanced and does not need external weights on the flywheel or flexplate. The crank shaft flywheel/flexplate bolt pattern on the LS series engines: 1997-2009: 6 bolt 2009+ and all LSX: 8 bolt ...