Checking the level of transmission fluid under the hood is nearly the exact same process as looking at the car’s oil level. Generally, the dipstick for transmission fluid will be located on the back side of the car’s engine near where the transmission meets the engine block. As you would...
When it is an automatic car, there is a confusion about whether tocheck transmission fluid hot or cold. Well, you should do the checking in both states because the fluid dilates when it is hot. Add fluid if the level is low.(Photo Source: ford-trucks) Do the checking when the fluid ...
解析 检查液位、电缆和接头. 这里,"Fluid Level" 是液位的意思,类似的应用如"Oil Level"-油位、"Water Level"-水位."Connections"虽然有连接的意思,但其复数形式通常指接头.结果一 题目 CHECK FLUID LEVEL,CABLES & CONNECTIONS 如何翻译? 答案 检查液位、电缆和接头.这里,"Fluid Level" 是液位的意思,类似的...
aCheck the transmission fluid level. The engines should be running at idle speed and at normal operating temperature. The transmission fluid should read FULL on the "dipstick". If the fluid level is low, add sufficient transmission fluid to raise the level to the FULL mark or slightly lower....
Once you find out the location of the inspection and fill the plug, warm up the transmission fluid to proceed further. The transmission fluid must be at the correct temperature – not too cold and not too hot – to get the accurate fluid check results. The temperature of the liquid should...
Do You Check Transmission Fluid While The Car Is Running? Should we inspect the fluid level when the engine is on? Unlike checking engine oil, the car expert always recommends that we should measure the oil when the engine is cold to help the oil settle in the oil pan and get an accu...
Main Menu Transmission Oil/Fluid Check Transmission oil/fluid must be checked with the engine off and the car on level ground. If the engine has been running, some engine components may be hot enough to burn you. CAUTION: If the oil/fluid level is low, check for possible leaks before ...
求翻译:Check the transmission fluid level. The engines should be running at idle speed and at normal operating temperature. The transmission fluid should read FULL on the "dipstick". If the fluid level is low, add sufficient transmission fluid to raise the level to the FULL mark or slightly ...
check chiller pipe integrity and fluid level. 青云英语翻译 请在下面的文本框内输入文字,然后点击开始翻译按钮进行翻译,如果您看不到结果,请重新翻译! 翻译结果1翻译结果2翻译结果3翻译结果4翻译结果5 翻译结果1复制译文编辑译文朗读译文返回顶部 正在翻译,请等待......
Check the level to avoid overfilling. The difference between the low and full marks on most transmission dipsticks is about 1/2 litre (about 1 pint). So if the reading is midway between them, about litre pint) is needed. If you top up the fluid level while the engine is cold, ...