局域网安装了个SVN在checkout的时候报错 SSL handshake failed: SSL error: Key usage violation in certificate has been detected. 解决方法(亲测): 1.如果你没安装wget先安装wget. yum install rpm-build wget 2.wget ftp://ftp.icm.edu.pl/vol/rzm2/linux-fedora-secondary/releases/15/Everything/source/...
彻底解决CHECK_NRPE: Error - Could not complete SSL handshake. 出现“CHECK_NRPE: Error - Could not complete SSL handshake.”的错误。 问题解决的步骤: 1. 确保openssh , openssl, openssl-devel版本一致。 在centOS 上,可以运行: yum install openssl openssl-devel 1. 2. nagios监控端的允许地址和目标...
SSL被禁用。确保编译的SSL支持,这也不是没有SSL支持(使用命令行开关)正在运行的的NRPE守护程序和check_nrpe插件都。---运行。/配置的- prefix = / USR /本地/ NRPE然后其他参数不加,程序会缺省带SSL编译,更没有理由怀疑--- 不正确的文件权限。确保NRPE配置文件(nrpe.cfg)是可读的用户(即Nagios的)NRPE从inet...
./check_nrpe -H 监控端ip 报错check_nrpe: ERROR - could not complete SSL handshake 因为使用xinetd起的客户端nrpe进程,所以只需配置好/etc/xinetd.d/nrpe即可,该文件里的only_from 已经配置了127和监控端ip 解决尝试: 感觉是连接数限制 本次新加了更具体的磁盘监控,-p到具体目录,导致service数大幅度增加,...
针对你提出的“check_nrpe: error - could not complete ssl handshake”错误,以下是几个可能的解决步骤和相关的代码片段,帮助你排查和解决问题: 检查NRPE服务状态: 确保NRPE服务正在运行。你可以使用如下命令来检查NRPE服务的状态并尝试重启它: bash # 检查NRPE服务状态 /etc/init.d/nrpe status # 重启NRPE服务 ...
The same error (CHECK_NRPE: (ssl_err != 5) Error - Could not complete SSL handshake) is now also seen after upgrading Icinga 2's OS from Debian Stretch to Buster. If the target system is still using NRPE 2, the followingworkaroundcan be applied:Switch to non-ssl connection. ...
Nagios配置nrpe出现如下错误: CHECK_NRPE: Error - Could not complete SSLhandshake. 解决方法:——>确保两边的防火墙都可以让5666端口通过! 在被控端 #vi /etc/xinetd.d/nrpe only_from//增加主控IP#vi/usr/local/nagios/etc/nrpe.cfg allowed_hosts//增加主控IP#servicexinetd restart ...
Nagios配置nrpe出现如下错误:CHECK_NRPE: Error - Could not complete SSL handshake.(1)/usr /local/nagios/etc/nrpe.c...
Many of us has been experiencing the “CHECK_NRPE: Error – Could not complete SSL handshake”. Why its happening ? It was happen when NRPE server is not allowing to access service from Nagios server. What we can do ? Don’t worry nothing is there to think much, You need to add nagi...
CHECK_NRPE: Error - Could not complete SSL handshake. (1)/usr /local/nagios/etc/nrpe.cfg 此配置文件是配置正确,多个IP地址逗号隔开,且要注意空格:allowed_host=127.0.0.1, 192.168.0.1 这是不对的,必须是allowed_host=127.0.0.1,192.168.0.1 逗号之后不能有空格; ...