Command rejected: An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode. 如果我先封装成DOT1q在配置trunk的话就会报另一个错%EC-5-CANNOT_BUNDLE2: Gig0/1 is not compatible with Po3 and will be suspended (dtp mode of Gig0/1 is on, Po3is off )...
In fact, it is likel?y to cause problems because one side will think it's channelling, and the other side will think it's not. Use on when you are talking to a switch that does not understand negotiation but which has channel configured on, or if you want to bypass the negotiation ...
Better not configured and the more soft with the PN group exist other general community or other relationship with the PN group community, that is: If a channel has a with the PN group, at this time it is better not to refer to communities of different distribution and the other with the...
interface Ethernet1/2 switchport access vlan 10 channel-group 2 mode active From the output we can see that the interface is currently a switchport in mode access and with vlan 10 configured. It also shows that this interface is part of a port-channel (channel-group). Acco...
For example, Policy permitting auto-redemption of invitations not configured. [TenantActionable <Boolean?>]: The action to take to resolve the error. For example, false. [State <String>]: synchronizationTaskExecutionResult [TimeBegan <DateTime?>]: Time when this job run began. The Timestamp ...
This action should open the S32CT and here you can check if the Adc is configured as required by your application. With the S32K396-Q289-copy.mex file, I have added both Channel0[0] and Channel0[1] inside the FreeMASTER project, obtaining the following results: Plea...
What is claimed is: 1.A user equipment (UE) for wireless communication, comprising:a memory; andone or more processors, coupled to the memory, configured to:measure a channel state information reference signal for a downlink cell associated with a first physical uplink control channel (PUCCH) ...
What is claimed is: 1. An apparatus for wireless communication in a network, comprising: (a) a wireless communication circuit configured as a first multi-link device (MLD) configured for wirelessly communicating at least one physical layer protocol data unit (PPDU) with at least one other stati...
1. Starting Data Collection 2. Connected to the main app. ready... but the ADC 0 selection is still not shown. thanks, Matt Hi Matt, If the EVM has started collecting data, there will be an LED flashing about once a second. This is a data ...
> The device firmware is not modifiable, as it is used for internal workings of the mux. It will not be able to be configured. It's not what I have hoped for but answers my questions. Thanks fort the feedback over all those posts!