你按完显卡驱动 在我的桌面右键属性 在里面选择分辨率1280*1024 在高级里选择刷新率60HZ 就是说需要设置一下分辨率。是在没有办法改变驱动的话，那就按个显示器驱动好了。
把分辨率改成1280*1024就可以了
1. When we connect a Windows10 laptop (with a lower active signal mode-1366x768 60Hz) using the above setup, there is no flickering. 2. When we connect a Microsoft Surface pro Windows11 laptop (with a lower active signal mode-1536x1024 60Hz) using the above setup, there...
Simply ask a new question if you would like to start the discussion again.Adrian50 1 0 0 10,089 New member 07-27-2020 12:24 PM Product: W2071d When I try to connect my xbox one s to my monitor it brings up “Signal out of range change setting to...
Next, click theSettingicon. And then selectVideo > the format you want like MP4 > Createto enter the Setting windows. There is a decent selection of frame rates that you can choose from with from 12 fps to 60 fps per second. You can increase the frame rate or decrease frame rate as ...
而此时刷新率大多数都显示为60Hz！！最后，当然上面的方法并不能解决类似的所有问题，因为有些软件运行时对屏幕分辨率的要求很怪，不过这种情况很少。如果你要精益求精，你就只有通过修改注册表和用第三方软件来解决，不过这里我就不谈了。当然有些显卡厂商非常体贴用户，把一些第三方软件的功能整合到了显卡...
60HZ,应该是屏幕显示设定超出此范围。处理：如何让显示器恢复正常，方法如下：1、开机时连按F8，选择安全模式，进入系统后，通过控制面板－设备管理器，卸载显卡驱动程序。2、重启电脑，以低分辨率进入系统后，系统会自动检测并安装显卡驱动，然后设置合适的屏幕分辨率、刷新率（1024*768 - 60HZ）即可。开机...
I've just tried attaching it to an other TV, and it does work and displays text on the screen with that TV. The TV reports that the image coming from the OrangePiPC is 1360x768 at 60hz. So that suggests that all my attempts to change the video/display mode...
Module Version, etc) - Timing Controller - 4 preset Gamma curve with separated RGB Gamma setting Build-In NV Memory for LCD Initial Register Setting - OTP to store VCOM and ID1~ID3 Driving Algorithm Support - 1-dot/2-dot/3-dot/4-dot Inversion - Column Inversion - Zigzag ...
1. When we connect a Windows10 laptop (with a lower active signal mode-1366x768 60Hz) using the above setup, there is no flickering. 2. When we connect a Microsoft Surface pro Windows11 laptop (with a lower active signal mode-1536x1024 60Hz) using the above setup, there ...