Tap washers How to replace a tap washer 1 Turn off the water supply. Some sinks will have an isolation valve underneath, otherwise turn it off at the mains. 2 If you’re here to find out how to change a tap washer on a mixer tap or hot water tap, turn off the boiler and immersio...
Most kitchen taps these days are modern mixer tap designs. This means that both hot and cold water are delivered through a single tap rather than through two separate taps for hot or cold. They may also feature a foam plate underneath the tap that provides a superbly tight seal atop the s...
As such, the air washer to check the on-load tap change transformer is able to wash, with air and in an easy manner, components of the on-load tap change transformer contaminated by grease materials such as lubricant oil and impurities from a filtering device in the air; thereby the air...
If you’re only replacing the washer on 1 tap (e.g., cold), don’t bother popping the cap or working on the other tap (e.g., hot). But this might be a good time to replace the washers on both taps.[7] 2 Remove the screw located under the cap, then remove the handle. Tu...