1、首先打开CFD-Post，点击Location，再点击Plane创建平面。2、其次Method选择ThreePoints，并设置三个点的坐标。3、最后生成的Plane是没有边界的，可以在PlaneBounds中选择Circular/Rectangular，并设置相应尺寸，即可将Plane调整的箭头大小。在生成流线图时将Location为你创建的Plane即可。
1. Insert plane. 2. Definition -> Method = XY Plane 3. Plane Bounds -> Type = Circular 4. Plane Bounds -> Radius = 1 Z is not radius but distance between coordinate system XY plane and your plane. Also note that by default plane type is "slice", so you'll see only intersection...
Try turning off the Plane Bounds which you have set to Circular (i.e. Set type to NONE). Does this show your plane? Now if you want to you can again clip the plane using circular, but make sure the value you specify is appropriate....
In CFD Post , I have created a plane to extract the results. Now I need to split this plane into 3 parts , the top , middle and bottom part. Does CFD post give any option for the same. Using plane bounds option does not seem to work. ...
But in my opinion, parameters from workbench can not be used for every way of defining a plane. It's possible for the Plane Bounds (including size and rotation angle), but not for defining an exact point or a non-rectangular plane. For example I want to create the plane with 3 points...