01：中央对齐模式1 计数器交替地向上和向下计数。输出比较中断标志位，只在计数器向下计数时被设置 10：中央对齐模式2 计数器交替地向上和向下计数。输出比较中断标志位，只在计数器向上计数时被设置 11：中央对齐模式3 计数器交替地向上和向下计数。输出比较中断标志位，只在计数器向下和向上计数时均被...
We are using a TC367 chip with 2.0 as the reference (configured with variable period and duty cycle) and 2.1,2.3,2.4 configured with 2.0 as the reference in center aligned mode (PWM_17_GTMCCU6_FIXED_PERIOD_CENTER_ALIGNED). Now I want to control the motor inverter, and I found that the...
TIM_CounterMode_CenterAligned1 中央对齐模式1。计数器交替地向上和向下计数。 产生下溢中断,配置为输出的通道(TIMx_CCMRx寄存器中CCxS=00)的输出比较中断标志位,只在计数器向下计数时被设置。 TIM_CounterMode_CenterAligned2 中央对齐模式2。计数器交替地向上和向下计数。 产生上溢中断,配置为输出的通道(TIMx_CC...
If you do use PLL, the source synchronous mode is meant to maintain data/clock relationship at pins right through to the registers. In other words it is meant for the case when PLL is not designed to rotate the clock. Translate 0 Kudos Copy link Reply All...
EP0567833April, 1993Optimum rotational mode decoupling shock mount configuration for DASD's. EP05701381993-11-18Portable disk storage apparatus. Other References: IBM Technical Disclosure Bulletin, vol. 27, No. 4B, p. 2691, Sep., 1984, "Dynafocal Shock Mount", G. White. ...
One is the longitudinal mode which is excited by long wavelengths and tuned by function of cos(2) (theta(p)) and the other is the transverse mode that is excited by short wavelengths and tuned by function of sin(2) (theta(p)). Simulation was performed based on the finite-difference ...
If you do use PLL, the source synchronous mode is meant to maintain data/clock relationship at pins right through to the registers. In other words it is meant for the case when PLL is not designed to rotate the clock. Translate 0 Kudos Copy link Reply All...