Following instructions from multiple people here I got the Prolific drivers installed and I see the mount in my System Report on the USB chain, but the CFM software just still won't see it. I've tried both the BootLoad option on the hand controller and just normal, tried having the moun...
The Version command (under Utilities) will tell you what firmware is loaded into the hand controller and motor controllers. As mentioned earlier so will running CFM when connected to the hand controller. 2" eyepiece don't provide more light (objects viewed are NOT brighter). 2" eyepieces can...
JERRY KWASEK
Celestron Firmware Manager (CFM) Customer reviews Average Rating (5 Reviews): Write a Review and share your opinions! Rating (max 5): Fantastic telescope 25 January 2019 | Ramman Absolutely brilliant, i would say that this telescope is beginner to mid-range having seen it's capabilities.Th...
【上海缔伦】CFM-200落射荧光显微镜大视野目镜 平场消色差 荧光物镜 上海函格生物科技有限公司 2年 查看详情 ￥1780.00/台 江苏苏州 XTL-7045J4型光学显微镜 7~180倍 带LED上下光源可接电子目镜 苏州倍特嘉光电科技有限公司 2年 查看详情 ￥99.00/台 江苏南京 眼科手术显微镜5A型45°观察斜度12.5X广角目...
somethings wrong but almost working well enough to get me on the wrong track (like a too short power plug and a defective USB cable) I got the firmware updated using CFM. The version in the hand controller is GEM 5.35.3175. Again, it mostly works unless I try to do a solar ...
Sad to report my AVX mount of 3 weeks has died during a CFM firmware update. The update reached 7% and failed. Subsequent updates don't go beyond 0%. The mount reverted to the older "Advanced GT" firmware but the mount keeps throwing up errors during use and the mount won't move. ...
I'm having difficulty rolling back to that exact firmware. I downloaded the archive from teamcelestron, but CFM just reports back that I'm up to date, even though offline is ticked. Yes to the most current CPWI. I use direct to mount usb to control when imaging and whilst troubleshooting...
The CGEM/CGEM II mounts were never on that list. Those mounts are still updated using MCupdate and the list they are currently maintaining is just the mounts, hand controls, etc. which are updated using CFM. Here are my instructions for updating the MC firmware in the CGEM/CGEM II: ...
1. (unplug HC or not), plug in SkyPortal adapter and try to update Mount over Wi-Fi using CFM 2. Plug adapter in next to HC, and update over USB to bottom of HC. If those aren’t the right way, can you point me at instructions?