When I upgraded from Win 10, to Win 11, I faced similar problems. Win 11 doesn’t like things that are not native to it, such as ‘virtual serial ports’. However, I couldn’t find fault in Windows Device Manager. I was completely baffled after three days of perseverance. The only ...
@Mark, I did some more testing yesterday and found that my programming cable works with NexRemote on both Win7 and Win10 laptops. The issue is not being able to select a virtual com port. As Noah4x4 pointed out, Win10 is not natively supporting serial/RS232 so even with the most most...
Some Planetarium may provide native support for Celestron drivers others may require the use of the ASCOM platform and associated ASCOM Nextstar drivers. Connections: The Synscan is connected to the mount in the usual way The PC is connected to the Synscan via the serial to RJ-11 cable >>...
I would un install all the device apps and drivers being used by the mount, reboot, and then first re install the Prolific com port driver and get the adapter working and then install CFM and do a firmware check/upgrade on your hand controller. Thanks, It does recognize as a USB device...
The driver-solution I use is a reinstall of an older driver version. Each Windows Update session updates that PL2303 driver to something new that prevents ASCOM and CPWI from connecting. Before each use of my laptop at the scope, I use the app's wizard to remove, and then reinstall, th...
All they need to do is provide standalone ASCOM drivers and let the professionals provide the software apps. All they are doing now is forcing bloatware on everyone. Not just S/W Bloatware but H/W Bloatware, as well. Thanks for your assistance. Much appreciated. Edited by hobsond, 29 ...
2. Remove any Prolific drivers that you installed. The readme included with the driver zip explains how to do this. 3. Install the driver without your hand controller connected to the Mac and reboot as required. You'll then have to go to the security setting and allow the drive to make...
version using the ARM installer. At that splash screen it shows a button to uninstall. I installed the Intel version. I clicked on the CFM.jar file and it opened up fine. Didn't have the the mount connected but as soon as I connected the USB cable from the hand controller it ...
True, I started the pinned thread because the Celestron documentation is so awful. The Nexstarsite.com might have since caught up, but when I published the first post there was no clear guidance anywhere for users of Windows 10 and/or Starsense. ...