Sending a holdtime value of150 seconds Sending CDPv2 advertisements is enabled 默认设备是开启的,为了防止通过CDP协议发现直连设备的状态信息,比如ip地址,IOS等等 有时候出于安全性,会关闭CDP R1(config)#no cdp run //全局关闭CDP协议 R1#show cdp % CDP is not enabled R1(config)#cdp run //开启CDP协...
However, once imported into CML-P and showing the running config I can see the opposite is the case: cdp is disabled globally with "no cdp run", interfaces have "no cdp enable", and running show cdp returns "% CDP is not enabled" Within that CML-P lab, I then amended the running ...
I've captured some packets with wireshark and i've seen that if CDP is enabled (on the switch interface or within the Polycom), switch send a CDP packet in which there is the "VoIP Vlan Reply" field set to 201 (instead of 707). While turning off CDP (at t...
The IP address or hostname of the host where the database is installed. The default is to use localhost. -p|--password The admin password for the database application. Use with the -u option. The default is no password. Do not put a space between -p and the password (for example,...
Sending CDPv2 advertisements is not enabled Table 1 show cdp Field Descriptions Related Commands show cdp entry To display information about a specific neighboring device or all neighboring devices discovered using Cisco Discovery Protocol (CDP), use theshowcdpentrycommand in EXEC...
command after a query has finished to see a comprehensive summary of all the performance and diagnostic information that Impala gathered for that query. Be warned, it can be very long! *** LDAP authentication is enabled but the connection to Impalais not secured by TLS. ALL PASSWORDS WILL...
$ sudo vim /etc/yum.repos.d/local_os.repo [local_iso] name=CentOS-$releasever - Media baseurl=file:///media/DVD1 gpgcheck=0 enabled=1 $ sudo yum repolist 重制OS的repo 安装完httpd后,重新制作操作系统repo,换成http的方式方便其它服务器也可以访问 代码语言:javascript 代码运行次数:0 运行 复制...
which is enabled by default on all interfaces, is a Data Link protocol that operates at Layer 2 of the OSI model. This is important to understand because CDP is not routable; it can only travel to directly connected devices.On R1, type the command that displays the status of all interface...
After this function is enabled, the system automatically deletes HyperCDP CGs whose protection periods have expired. NOTE: Before enabling this function, ensure that the HyperCDP CGs do not need to be protected after the protection periods expire and need to be automatically deleted by the syste...
After this function is enabled, the system automatically deletes HyperCDP objects whose protection periods have expired. NOTE: Before enabling this function, ensure that HyperCDP objects do not need protection after the protection periods expire and can be automatically deleted by the system. ...