ConfigurationInt, ConfigurationDouble, ConfigurationBoolean } ccConfigurationType; class CC_DLL CCConfiguration : public CCObject { public: //配置类 是一个全局单例 static CCConfiguration *sharedConfiguration(void); //清空配置 static void purgeConfiguration(void); public: virtual ~CCConfiguration(void);...
USB Type-C Configuration Channel (CC)引脚功能介绍 1.插入检测 DFP(下行端口)为主机端口,UFP(上行端口)为设备端口。如图所示,在DFP中的CC通道上有上拉电阻,相应的在UFP中有对应的下拉电阻。在DFP与UFP连接之前,VBUS没有输出,当两者连接之后,DFP检测到CC引脚的电平被拉低,DFP则识别到UFP设备已连接并打开VBUS上...
USB Type-C Configuration Channel (CC) 功能分析 USB Type-C Configuration Channel (CC) 功能分析 架构总览 插入检测 识别电缆方向 在两个端口间协商建立DFP和UFP身份 发现和配置VBUS,电流模式或者PD模式 配置V…
Automating CC configuration process Control Center installation includes a sample silent configuration script, runConfigCCSample.sh. It is located under<<CCInstallDir>>/utilsdirectory. To automate the configuration, the sample script should be cloned, edited to specify required values and saved...
CC(Configuration Channel):配置通道,这是USB Type-C里新增的关键通道,它的作用有检测USB连接,检测正反插,USB设备间数据与VBUS的连接建立与管理等。 USB PD(USB Power Delivery): PD是一种通信协议,它是一种新的电源和通讯连接方式,它允许USB设备间传输最高至100W(20V/5A)的功率,同时它可以改变端口的属性,也可...
write permissions on the configuration file and directory: ll /opt/cloud/CC-Service/ccaas ● If no, go to Step 5. ● If yes, contact technical support. Step 5 Run the following commands to change the configuration file permissions: chown -Rh cconnect:cconnect /opt/cloud/CC-Service/ccaas ...
SKIP_CONFIGURATION_CONSISTENCYCHECK=true -Dlogging.config=/opt/batch/auth_server/config/log4j2.xml -Dserver.port=8085 -Dserver.address=192.168.101.16 -Dloader.path=/opt/batch/auth_server/bin/../auth_server/lib/,/opt/batch/auth_server/bin/../auth_server/auth_server-1.0.jar -Dspring.config....
simatic wincc configuration启动项关闭流程 1打开金山毒霸, 点击【百宝箱】 2在百宝箱的系统辅助中, 点击【开机加速】 3开机扫描,完成扫描后 根据建议和自身需求选择 4加速完毕 5除了优化已有启动项 当程序创建启动项时 我们会及时给与提醒 使用毒霸开机加速功能有问题?联系我们...
Configurationconfig=HBaseConfiguration.create(); 1. 接下来,我们可以使用config对象来设置和获取HBase的配置项。 设置配置项的值 通过HBaseConfiguration实例的set方法,可以设置配置项的值。例如,我们可以设置HBase的数据存储路径: AI检测代码解析 config.set("hbase.rootdir","hdfs://localhost:9000/hbase"); ...
点击CCS UniFlash的“File->New Configuration”菜单,并连接CC3200开发板,如下图16所示。 图16使用CCSUniFlash连接CC3200开发板 确保左侧窗口中选中的是“CC31xx/CC32xx Flash Setup and Control”,在“COM Port”中填写CC3200开发板的串口号,点击“Format”按钮,在“Capacity”中选择“1MB”并...