https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-6/command_reference/b_166_9300_cr.pdf To configure 40-G port 4 on a standalone device, enter this command: Device(config)# interface fortygigabitethernet1/0/4 40G以太网接口名称 Interface and Hardware Comp...
A Cisco Catalyst 9300 Series Switch, when deployed in StackWise-1T/480/320 mode, has been designed to deliver deterministic and nonblocking switching performance to a maximum port density of 448 ports with a distributed data plane, single control plane, and management plane. The switching ...
Device(config-if)# access-session port-control auto ポートの認可状態を設定します。 ステップ 10 dot1x pae both 例: Device(config-if)# dot1x pae both ポートを 802.1X ポート アクセス エンティティ(PAE)のサプリカントおよびオーセ...
The supplicant sends a special EAPOL message to the authenticator that contains the RADIUS server IP address and UDP port and the complete RADIUS request. The authenticator extracts the RADIUS request from the received EAPOL message and sends it over...
4 port port-number (Optional) Configures the policy server port Example: number. Device(config-policy-server)# port 9063 Note The ERS server port number must be 9063. You cannot change this port number. Cisco TrustSec Configuration Guide, Cisco IOS XE 17.13.x (...
The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a MKA peer) using the current session key. The MKA Protocol manages the encryption keys used by the underlying MACsec protocol....
Cisco Catalyst 9300 Series Switchesare Cisco’s lead stackable access platform for the next-generation enterprise and has been purpose-built to address emerging trends of Security, IoT, Mobility, and Cloud. They deliver complete convergence with the rest of theCisco Catalyst 9000 Series...
Protocol/Port Direction Application Server TCP 80, 443, 7600, 8080, 8443, 57600 bidirectional Configuration Database TCP 5000, 7474, 7687 bidirectional Coordination Server TCP 2181, 2888, 3888 bidirectional Message Bus TCP 4222, 6222, 8222 bidirectional Statistics Database TCP 9200, 9300 ...
When the packet enters the trunk port of the service-provider egress device, the outer tag is again stripped as the device internally processes the packet. However, the metro tag is not added when the packet is sent out the tunnel p...
Port: Number of the TCP/UDP port that is used for HTTPS traffic. The default is port number 443 (the well-known port for HTTPS). Write You can configure up to 10 HTTPS write credentials: Name/Description: Nam...