The carbon particles provide electrical conductivity and act as a rheology modifier, creating a printable shear-thinning gel. The ink’s conductivity and sheet resistance are 1000 S m−1 and 15 Ω sq−1, resp
The adoption of carbon-based fillers (nanotubes, graphene and its derivatives, graphite, activated carbon, and biochar) in polymer composites has gained great interest due to good interfacial bonding with polymer, availability in different forms, etc. Table1compares the performance and characteristics o...
The inset (Scale bar: 5 μm) shows that the bare CNT micro-conduit structure collapses and forms a matt-like structure on the CC micro-fiber. f Comparison of areal specific capacitances of bare CC, CNT micro-conduit, and CNT/GP micro-conduit electrodes at different scan rates from 2 ...
The conductivity of 3D printable composites is most often obtained through the addition of different forms of conduc- tive carbon nanofillers, such as graphene, carbon black (CB) or carbon nanotubes (CNTs). The amount of these nanofillers must be sufficient to form continuous conductive paths ...
For the contractors, the forms for a waste diversion project for a particular jurisdiction must be properly completed out and filed, the required approvals for the project must be obtained, the compliance to regulations must be monitored during the project, including the creation of project records...
up to 100 tonnes annually of its TUBALL™ single wall carbon nanotubes in Europe thanks to the company’s upgraded dossier under the EU’s “Registration, Evaluation, Authorization and Restriction of Chemicals” (REACH) legislation, being additionally compliant with the new Annexes on nanoforms. ...
A blade-coated composite paste, composed of a compressible 3D carbon skeleton, PEDOT:PSS, and CNTs, can naturally dry to form a porous electrode on paper with a micro- and nano-structured surface. The all-paper pressure sensor demonstrated an ultrahigh sensitivity of 1014 kPa−1, a wide re...