car packet-type arp-request cir 128 是一个用于网络设备(如华为交换机)的配置命令,用于限制上送CPU的ARP请求(ARP Request)报文的速率。下面是关于这个命令的详细解释: 命令的语境和用途: 这个命令通常用于华为的网络设备,如交换机或路由器。 它的目的是防止网络中的ARP请求报文过多,导致CPU过载,从而影响设备的...
# 配置防攻击策略test的报文限速规则,设置报文类型为arp-reply,承诺信息速率为64kbit/s,承诺突发尺寸为33000byte。 <HUAWEI>system-view[HUAWEI]cpu-defend policy test[HUAWEI-cpu-defend-policy-test]car packet-type arp-reply cir 64 cbs 33000Warning: Improper parameter settings may affect stable operating of...
<HUAWEI> system-view [HUAWEI] cpu-defend policy test [HUAWEI-cpu-defend-policy-test] car packet-type arp-reply cir 64 cbs 33000 Warning: Improper parameter settings may affect stable operating of the system. Use this command under assistance of Huawei engineer s. Continue? [Y/N]:y Tra...
(packet radio) D: Baycom driver S: Markusstrasse 18 S: 8006 Zuerich S: Switzerland N: Manuel Estrada Sainz D: Firmware loader (request_firmware) N: Wayne Salamon E: wsalamon@tislabs.com E: wsalamon@nai.com D: portions of the Linux Security Module (LSM) framework and security modules...
协议名称。可执行cpu-defend dynamic-car[ospf|arp|vrrp]进行设置。 Packet-type 报文类型。 Slot 动态调整默认CPCAR值发生所在的槽位号。 CIR(Kbps) 动态调整后的新默认CPCAR值,即承诺信息速率值(千位/秒)。当协议报文的默认CPCAR值恢复为原始默认CPCAR值时,此处显示为NA。
协议名称。可执行cpu-defend dynamic-car[ospf|arp|vrrp]进行设置。 Packet-type 报文类型。 Slot 动态调整默认CPCAR值发生所在的槽位号。 CIR(Kbps) 动态调整后的新默认CPCAR值,即承诺信息速率值(千位/秒)。当协议报文的默认CPCAR值恢复为原始默认CPCAR值时,此处显示为NA。
If ospf, vrrp, and arp are not specified, the switch is globally enabled to dynamically adjust the default CIR value of a protocol packet. Precautions The switch dynamically adjusts the default CIR value for VRRP, OSPF, or ARP protocol packets only when the function is enabled globally and ...
To configure a protocol, run the cpu-defend dynamic-car [ arp | vrrp ] command. Packet-type Packet type. Slot ID of the stack where the default CIR value is dynamically adjusted. The value indicates the slot ID if stacking is not configured. CIR(Kbps) Dynamically adjusted default CIR...
To configure a protocol, run the cpu-defend dynamic-car [ arp | vrrp ] command. Packet-type Packet type. Slot ID of the stack where the default CIR value is dynamically adjusted. The value indicates the slot ID if stacking is not configured. CIR(Kbps) Dynamically adjusted default CIR...
To configure a protocol, run the cpu-defend dynamic-car [ arp | vrrp ] command. Packet-type Packet type. Slot ID of the stack where the default CIR value is dynamically adjusted. The value indicates the slot ID if stacking is not configured. CIR(Kbps) Dynamically adjusted ...