ethtoolwhen run to get details of interface , gives error like below. Raw ~]# ethtool eth1 settings for eth1: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No...
Auto-negotiation: on Cannot get wake-on-lan settings: Operation not permitted Current message level: 0x00000000 (0) Link detected: yes == System B (vppctl for ip setup ) == $ sudo vppctl set int ip address bnxt0 10.1.1.10/24 $ sudo vppctl show interface address bnxt0 (up): L3 ...
I want to use wakeonlan to wake up my computer from sleep using my phone. But the option 'enable this device to wake computer' is greyed out in Windows...
So I want to configure wake-on-lan to be able to turn on my computer from sleep from my phone. I just built this PC and the motherboard is Gigabyte B450M DS3H, which has a Realtek RTL8168/8111 network adapter built in, and it supports wake on lan acc...
For the driver settings, proceed with the instructions below: In Device Manager > your Ethernet Adapter > the Advanced Tab Shutdown Wake Up set to Enabled Wake on Pattern Match set to Enabled (Depending on your setup, Wake-on-LAN may work with this disabled.) Wake on Magic Pa...
1. Unable to connect to Wi-Fi:Please check that your connection settings are correct. a. Check whether the Wi-Fi printer you are using supports AirPrint, and turn the printer on after confirming that it does. If your printer model name is not in the AirPrint list, it may not support...
Broadcom NetXtreme 5717, 5718, 5719, 5720, 5725, and 5727 Gigabit Ethernet NICsuse the non-volatile RAM (NVRAM) to configure some features, such as Wake-on-LAN (WOL). With the tg3 driver you can enable or disable WOL through the user interface of vSphere, without changing the configuratio...
Open the Run search box by pressing Windows key + R on your keyboard. Type in control, select OK. Click on Power options. select Choose what the power buttons do. Select Change settings that are currently unavailable. Look for Shutdown settings and remove the check for the box to Fast ...
Under "Network," look for "Wake On LAN" and select "AC and Battery." Save and exit. To enable the feature in Windows 10, follow these steps: Open "Settings." Click on "Network & Internet." Click on "Status." Under the "Advanced network settings" section, click t...
I've tried various things I've found on the Internet, including trying several of the "tweaks" described here, https://www.xtremerain.com/cannot-access-device-path-file. Specifically, solution 2: Enabling - Computer Configuration > Windows Settings > Security Settings > Local Policies > ...