.clk(sys_clk_x2), .rstn(resetn), .vid_active_video() ); When i trying to run the simulation, i met with the error. Here is the simulation log: Starting static elaboration ERROR: [VRFC 10-426] cannot find port vid_active_video on this module ERROR: [XSIM 43-3322] Static elab...
As you are using an old kernel version, I wanted to check if we saw this kind of error in the past. Could you please put a trace in es8328_set_sysclk() function to check the clock_id that is passed in argument ? Kind regards. Erwan. In order to give better visibility on the ...
set容器,又称集合容器,即该容器的底层是以红黑树变体实现的,是典型的关联式容器。这意味着,set容器中的元素可以分散存储在内存空间里,而不是必须存储在一整块连续的内存空间中。跟任意其它类型容器一样,它能够存放各种类型的对象。 2023-02-27 15:42:40 ...
hub 1-0:1.0: 1 port detected xhci-hcd 100e0000.xhci_0: xHCI Host Controller xhci-hcd 100e0000.xhci_0: new USB bus registered, assigned bus number 2 xhci-hcd 100e0000.xhci_0: Host supports USB 3.0 SuperSpeed usb usb2: We don't know the algorithms for LPM for this host, disabling...
hub 2-0:1.0: over-current change on port 1 ata2: SATA link down (SStatus 0 SControl 300) VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: ...
Solved: I have a RM3 board from bluechip technologies. I've been able to port u-boot and kernel to it, using the boundary devices android builds as a
link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 这里就开始启动网络处理了,我这里配置好ipaddr serverip后可以进行tftp操作。 --- 以下是我的printenv信息: => printenv arch=arm args_mmc=run finduuid;s...
[ 1.790827] [drm] Cannot find any crtc or sizes[ 1.795836] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 0[ 1.811321] loop: module loaded[ 1.815693] input: fxos8700 as /devices/platform/i2c-rpbus-14/i2c-14/14-001e/input/input0[ 1.825988] fxos8700 device ...
What confuses me is that even without forcing this value, suspend works correctly. That is, I see how the host puts the port to suspend state, then wakes it up (I use a second keyboard for this), and the RPi USB gadget continues to work perfectly again, no matter how many times this...
init: cannot find '/system/bin/sh', disabling 'console' From reading online in the forums, it seems I may not be loading the filesystem correctly. Can anyone please guide me on how to tackle this problem? Here is the full bootlog (note: even though it says Sabre Lite...