“crash: cannot find booted kernel”错误通常发生在尝试使用crash工具分析内核崩溃转储文件或实时系统时,系统无法找到与当前运行的内核匹配的内核对象文件(vmlinux)。以下是一些解决此问题的步骤: 确认错误环境: 首先确认该错误是在分析内核崩溃转储文件时出现的,还是在尝试对实时系统进行调试时出现的。 查找相关文档和...
Neither kernel-debug-common-* is not available . I assume that due to this fact I do not have /usr/lib/debug/lib/modules/ directory with vmlinix in order to proceed with vmcore analysis . # crash ... crash: cannot find booted kernel -- please enter namelist argument Please advise . ...
It will probably be named something like "6.8.4-dirty" by the kernel build system, because we did not git commit our patch. Now you can boot test this kernel. If the patch helps, you'll find something like this in the dmesg output: scsi 0:3:0:0: scsi_get_vpd_size: l...
The 3F0 error showed up, but the computer eventually booted normally after removing and reinserting the M.2 SSD into the computer. Some time later the system became unresponsive again and I force shut it down again, and though the computer rebooted, it stalled on the booting screen and then...
So ... I booted back into the old 6.6.13 kernel, built and installed the driver, rebooted. And, yes, now it works: # ./epct64e -get -nic=1 Ethernet Port Configuration Tool EPCT version: v1.41.03.01 Copyright 2019 - 2024 Intel Corporation. Available Port Opt...
find_booted_kernel: check: /usr/lib/debug/lib/modules/5.0.16-100.fc28.x86_64/vmlinux find_booted_kernel: found: /usr/lib/debug/lib/modules/5.0.16-100.fc28.x86_64/vmlinux get_live_memory_source: /dev/crash /sbin/modprobe crash ...
On bootup, it takes a very long time to boot and once booted the audio and the Windows Hello camera do not work, in addition to a non-working WiFi adapter. I've tried everything, including reinstalling windows 10 with a fresh SSD with no effect and cannot get it working. Tra...
1.关于你要提交的问题 Q:是否搜索了issue (使用 "x" 选择) [x ] 没有类似的issue 2. 详细叙述 (1) 具体问题 A:eth0连接别的网口时,尽管网口灯是亮着的,但是在页面上看,显示半双工,没有协商成1000M。eth0作为WAN也无法正常使用 (2) 路由器型号和固件版本 A:h68k,线刷
The board only differs from the EVK in the PCB layout, thus we updated the DDR timing and it booted from the SD card. However, it could not enter the phase of loading the kernel as the DT cannot be found. Below is the boot log : U-Boot SPL 2023.04-lf_v2023.04+gc9bc261c...
Following this thread, I booted VMWare into the bios via F2 to prevent the network boot from trying to preempt the disk. So finally, when I try booting, I see: Welcome to GRUB! error: no such partition Entering rescue mode... grub rescue> This is the farthest I'...