使用CAN接口过程中出现“No buffer space available”提示信息,相关打印信息如图A-1所示。 图A-1打印信息 原因分析 执行命令./cangen can2 &发送数据时,buffer空间不够。 解决方法 执行如下命令,查询CAN口详细信息。 ip -details link show can2 执行如下命令,修改缓冲队列空间长度。
错误 write: No buffer space available write(s, &frame, sizeof(struct can_frame)) 的输出结果为-1; 1. 2. 原因 由于缓冲队列空间不足; sudo su root@super:/sys/class/net/can1# cat tx_queue_len 10 root@super:/sys/class/net/can1# echo 1000 > tx_queue_len root@super:/sys/class/net...
write: No buffer space availablewrite(s, &frame, sizeof(struct can_frame)) 的输出结果为-1; 原因 由于缓冲队列空间不足; sudosuroot@super:/sys/class/net/can1#cattx_queue_len10root@super:/sys/class/net/can1#echo1000>tx_queue_len root@super:/sys/class/net/can1#cattx_queue_len1000suus...
can通信发送提示 No buffer space available 由于缓冲队列空间不足 设置即可 echo 4096 > /sys/class/net/can0/tx_queue_len
No buffer space available root@txmp-1530:~# cansend can0 1 2 3 4 5 6 7 8 -i 200 interface = can0, family = 29, type = 3, proto = 1 write: No buffer space available root@txmp-1530:~# root@txmp-1530:~# root@txmp-1530:~# ip -details link show can0 2: can0: <NO...
若执行./cangen can2 &命令提示“No buffer space available”,请参见使用CAN接口过程中出现“No buffer space available”提示信息。 在Atlas 500 A2 智能小站B上执行如下命令,添加candump执行权限。 chmod +x candump 在Atlas 500 A2 智能小站B上执行如下命令,接收数据。
write: No buffer space available 因为不可预知另外的can有没有连线,或者有没有挂载上等待接受,如果单方不断发送数据,是不是就会把缓冲区占满,那么有什么比较好的解决办法可以克服这样的情况。 经过这么多天的代码追踪,终于解决了这个问题。 总结下:1、如果发现接收或者发送都没有反应,考虑是否进入bus进入离线状态...
write: No buffer space available This means you CAN controller fails to send CAN frames, this is consistent with the ifconfig output. Make sure you have a working CAN bus, proper Termination, same bitrate, at least two CAN stations. socket: Too many open files Have a look the program...
No archetypes currently available. The archetype list will refresh when the indexes finish updating 2019-12-22 11:00 −配置方法: 1. 在卡住的而画面点击"config" 2. 点击"Add remote catalog", 然后设置华为云的maven仓库地址, 然后点击"verrify", 发现找到很多arhcetypes. description的地方随便起个名字...
Connect an oscilloscope and see whether the bus is behaving properly. If the device logs a “No buffer space available” message during send, enter this command to use the polling mechanism: $ cangen -L 8 can0 -p 1000 Obtaining Higher Bit RatesYou...