【参数】 ratio:指定以太网接口允许通过的最大广播流量占该接口最大速率的百分比,取值范围为0～100。数值越小,允许通过的广播流量也越小。 pps max-pps:指定以太网接口每秒允许转发的最大广播包数,单位为pps(packets per second,每秒转发的报文数),取值范围为0～1.4881×接口最大速率(如GE口为0～1488100,40GE口...
Setting the bandwidth percentage is the same as setting the rate limit in pps. Take an interface of 1 Gbit/s as an example. If the bandwidth percentage is set to 50%, the device converts the bandwidth percentage to rate limit in pps as follows: (1000 x (50/100) x 1000 x 1000...
【参数】 ratio:指定以太网接口允许通过的最大广播流量占该接口最大速率的百分比,取值范围为0～100。数值越小,允许通过的广播流量也越小。 pps max-pps:指定以太网接口每秒允许转发的最大广播包数,单位为pps(packets per second,每秒转发的报文数),取值范围为0～1.4881×接口最大速率(如GE口为0～1488100,40GE口...
Setting the bandwidth percentage is the same as setting the rate limit in pps. Take an interface of 1 Gbit/s as an example. If the bandwidth percentage is set to 50%, the device converts the bandwidth percentage to rate limit in pps as follows: (1000 x (50/100) x 1000 x 1000)/...
Setting the bandwidth percentage is the same as setting the rate limit in pps. Take an interface of 1 Gbit/s as an example. If the bandwidth percentage is set to 50%, the device converts the bandwidth percentage to rate limit in pps as follows: (1000 x (50/100) x 1000 x 1000)/...
Setting the bandwidth percentage is the same as setting the rate limit in pps. Take an interface of 1 Gbit/s as an example. If the bandwidth percentage is set to 50%, the device converts the bandwidth percentage to rate limit in pps as follows: (1000 x (50/100) x 1000 x 1000)/...
Setting the bandwidth percentage is the same as setting the rate limit in pps. Take an interface of 1 Gbit/s as an example. If the bandwidth percentage is set to 50%, the device converts the bandwidth percentage to rate limit in pps as follows: (1000 x (50/100) x 1000 x 1000)/...
Setting the bandwidth percentage is the same as setting the rate limit in pps. Take an interface of 1 Gbit/s as an example. If the bandwidth percentage is set to 50%, the device converts the bandwidth percentage to rate limit in pps as follows: (1000 x (50/100) x 1000 x 1000)/...
Setting the bandwidth percentage is the same as setting the rate limit in pps. Take an interface of 1 Gbit/s as an example. If the bandwidth percentage is set to 50%, the device converts the bandwidth percentage to rate limit in pps as follows: (1000 x (50/100) x 1000 x 1000)/...
Setting the bandwidth percentage is the same as setting the rate limit in pps. Take an interface of 1 Gbit/s as an example. If the bandwidth percentage is set to 50%, the device converts the bandwidth percentage to rate limit in pps as follows: (1000 x (50/100) x 1000 x 1000)/...