Comparable to Wilwood PN 140-9072, 140-9072-D, 140-9072-DR, and 140-9072-R. This kit is designed and machined in-house, and uses Wilwood calipers, pads, and rotors. NOTE: Fits 2wd models and most 20" wheels.Related Products Quick view Choose Options Ford 04-08 F150 FRONT TC6 16"...
F150 trucks. This setup uses the same 16" rotors and 6-piston calipers as the front, but a smaller piston area. This allows it to keep the bias proportional while still achieving a matching look. This kit is designed and machined in-house, and uses Wilwood calipers, pads, and rotors. ...
The brake disc (or rotor) is the rotating part of a wheel's disc brake assembly, against which the brake pads are applied. The material is typically gray iron,a form of cast iron. The design of the discs varies somewhat. Some are simply solid, but others are hollowed out w...
Product Name:Auto Parts Brake Pads; Quality:100% Professional Test; Application:Automotive Brake System; Type:Brake Lining; Material:Non-Asbestos; Position:Rear; Classification:Drum; Drum Brakes Classification:Brake Lining; Main Market:All Around The World; ...
calipers based on brake pedal pressure applied by the driver. Pistons in the master cylinder should respond to the brake pedal by pushing brake fluid toward the calipers and the increase in hydraulic pressure causes the pistons in the brake calipers to force the brake pads against the rotors. ...
Very interesting note, I didn't take pictures of them, but the Alcon rear pads were full length friction material and not milled away like the OEs pictured below. I find it very strange Ford would do this and must definitely be some cost cutting measure to obtain the brake bias th...
When purchased with our rear kit the calipers are substituted with a larger bore size to keep the front/rear bias proportional. This kit is designed and machined in-house, and uses Wilwood calipers, pads, and rotors. NOTE: Fits 4wd models and most 20" wheels....
This kit is designed and machined in-house, and uses Wilwood calipers, pads, and rotors. Wheel size requirement: Fits inside most 20" wheels. NOTE: 1997-2000 models with 12mm studs (manufacture date thru Nov 1999) will be upgraded to 14mm studs as part of the brake package. M14x2.0 ...
Description Instructions A 16" disc brake upgrade with 6-piston TX6 calipers designed for Ford F150 trucks, 2009-2011. This kit is designed and machined in-house, and uses Wilwood calipers, pads, and rotors. NOTE: Fits most 22" wheels. ...
This kit is designed and machined in-house, and uses Wilwood calipers, pads, and rotors. NOTE: This kit fits the C-clip 8.8 axles found in most F150/Bronco models. This kit DOES NOT fit Ford 9" bolt-in style axles (i.e., axles with a bearing retainer at the flange). If you ...