u-boot:启动详细的代码调用流程u-boot.lds:(arch/arm/cpu/u-boot.lds)|-->_start:(arch/arm/lib/vectors.S)|-->reset(arch/arm/cpu/armv7/start.S)|-->save_boot_params(arch/arm/cpu/armv7/start.S)/*将引导参数保存到内存中*/|-->save_boot_params_ret(arch/arm/cpu/armv7/start.S)|-->...
Linux的最最前面部分是用8086汇编语言编写的(boot/bootsect.s),它将由BIOS读入到内存绝对地址0x7C00(31KB)处,当它被执行时就会把自己移动到内存绝对地址0x90000(576KB)处,并把启动设备中后2KB字节代码(boot/setup.s)读入到内存0x90200处,而内核的其他部分(system模块)则被读入到从内存地址0x10000(64KB)开始处,...
接下来就只有从网络初始化入口initr_net函数开始,查看网络初始化哪里有问题。 在board_r文件中的init_sequence_r调用 可以看到initr_net函数其实就两个作用,一是调用eth_initialize进行网络初始化,二是调用reset_phy对phy进行复位,具体实现,如下; static int initr_net(void){puts("Net: ");eth_initialize();#...
so most of data are used at runtime or hard-coded in kernel asplatform data. But each board would have to have a kernel tailored for that platform. So the solution isDevice Treeand one kernel fits them all. since 2013 linux 3.8
(CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK) /* * Various SoCs need something special and SoC-specific up front in * order to boot, allow them to set that in their boot0.h file and then * use it here. * * To allow a boot0 hook to insert a 'special' sequence after the vector * table ...
Boot Sequence翻译成中文是引导顺序、启动顺序,是学习linux的一个重要的知识点,也是一个基础的知识点,做下笔记。 Linux Boot Sequence: 1、load bios(hardware information) 加载BIOS(硬件信息),BIOS:Basic Input Output System(基本输入输出系统),是一组固化到计算机内主板上一个ROM芯片上的程序,它保存着计算机最重...
嵌入式Linux开发-uboot常用命令介绍(下篇) 1. 前言 这篇文章是UBOOT命令介绍的下篇,接着上篇文章介绍剩下的几个命令用法。 主要是涉及的命令是:磁盘分区、磁盘文件加载、内核引导、二进制文件加载、跳转命令、磁盘文件系统格式等等。 2. UBOOT命令 2.1 fatls –列出指定目录下的文件...
Linux开机启动(bootstrap) 计算机开机是一个神秘的过程。我们只是按了开机键,就看到屏幕上的进度条或者一行行的输出,直到我们到达登录界面。然而,计算机开机又是个异常脆弱的过程,我们满心期望的登录界面可能并不会出现,而是一个命令行或者错误信息。了解计算机开机过程有助于我们修复开机可能出现的问题。
Boot flowis the sequence of operations that the Bootloader performs to initialize the SoC and bootNVIDIA®Jetson™Linux. Here are the major operations that the Bootloader performs: Initializing the storage devices, memory controller (MC), external memory controller (EMC), and CPU ...
d、最后do_bootm_linux函数调用theKernel (0, machid, bd->bi_boot_params)去启动内核并传递参数,可以看见r0是machid,r2是bi_boot_params参数的地址。 2、Kernel读取U-boot传递的相关参数 对于Linux Kernel,ARM平台启动时,先执行arch/arm/kernel/head.S,此时r2寄存器的值为参数的地址,此文件会调用arch/arm/ke...