2、通过Hardware Manager去烧入到板卡的Flash中; 3、烧写完成后选择Boot from Configuration Memory Devive去加载FPGA。 4、在FPGA加载后可以看到板卡上面LED2灯点亮。 5、在Hardware Device Properties的BOOT_STATUS里面可以看到INTERNAL_PROG使能;由于加载没有错误,目前运行的是Multiboot程序。CONFIG_SATUS里面可以看到DON...
2、通过Hardware Manager去烧入到板卡的Flash中; 3、烧写完成后选择Boot from Configuration Memory Devive去加载FPGA。 4、在FPGA加载后可以看到板卡上面LED2灯点亮。 5、在Hardware Device Properties的BOOT_STATUS里面可以看到INTERNAL_PROG使能;由于加载没有错误,目前运行的是Multiboot程序。CONFIG_SATUS里面可以看到DON...
RAM Disk Boot Path: NET(0)\SMSIMAGES\RR200004\BOOT.RR200004.WIM Booted from network (PXE) Network(PXE) path: X:\sms\data\ Found config path X:\sms\data\ This is not a fixed non usb disk Booting from removable media, not restoring bootloaders on hard drive X:\sms\data\WinPE does ...
若要执行此操作,请突出显示OfflineComponentHive,然后选择“文件>卸载”配置单元。 选择HKEY_LOCAL_MACHINE,转到文件>加载 Hive,导航到OSdriveLetter:\Windows\System32\config,选择名为SYSTEM的文件(无扩展名),然后选择“打开”。出现提示时,输入新配置单元的名称OfflineSystemHive。 ...
bcdedit /store <Boot partition>:\boot\bcd /set {bootmgr} device partition=<boot partition>: bcdedit /store <Boot partition>:\boot\bcd /set {bootmgr} integrityservices enable bcdedit /store <Boot partition>:\boot\bcd /set {<Identifier>} device partition=<Windows partition>: bcdedit /store <...
To prevent errors when config.sys attempts to reference the hardware query components that you deleted, edit A:\config.sys to contain onlyCopy DEVICE=A:\DOS\HIMEM.SYS DEVICE=A:\DOS\EMM386.EXE FRAME=NONE DOS=HIGH,UMB FILES=30 BUFFERS=20 LASTDRIVE=Z STACKS=9,256 SHELL=A:\COMMAND.COM ...
If you have recently made changes to UEFI (BIOS) settings, such as changing the controller mode from legacy to AHCI in UEFI, revert those changes. For more information, seeAdvanced host controller interface. Check for storage device compatibility. ...
如果使用IB类型的HCA卡连接阵列,执行upLinux config ib命令配置IB驱动服务,其目的是自动将IB卡连接的阵列磁盘上报给主机接管。 如果使用Qlogic或Emulex的HBA卡连接阵列,且配置文件unattend_install.conf的配置项hba_settings_enable设置为n,执行upLinux updateImage命令更新操作系统镜像,其目的是使在安装过程中对Qlogic或Em...
Place the Jetson device into Recovery mode. Enter the following command: $ sudo ./flash.sh -u <pkc_keyfile> [-v <sbk_keyfile>] <target_config> mmcblk0p1 Note If the-vcommand option is specified, the-ucommand option also must be specified. ...
Device Drivers -> MMC Host controller Support -> Enable MMC controllers using Driver Model 最终反映在.config文件中的CONFIG_DM_MMC=y 在对应的驱动中,可以看到判断#if !CONFIG_IS_ENABLED(DM_MMC),来判断是否打开DM驱动模型。 在管理驱动的Makefile文件中,也能看到obj-$(CONFIG_$(SPL_)DM_MMC) += mm...