The “Bochs ROM: Couldn’t open ROM image file VGABIOS-lgpl-latest” error can occur due to various reasons: 1. Missing or Incorrect VGABIOS ROM Image File The most common cause is that the VGABIOS ROM image file is missing or not located in the expected directory. Bochs attempts to op...
https://github.com/microsoft/WSL/issues/6389 sudo apt-get install -y bochsbios and sudo apt-get install -y vgabios might help
romimage: file=$BXSHARE\BIOS-bochs-latest megs:16ata0-master: type=disk, path="hdc-0.11-new.img", mode=flat, cylinders=410, heads=16, spt=38boot: c log: bochsout.txt 双击启动 硬盘启动成功 注:如果报如下错误:ata0-0: could not open hard drive image file 'hdc-0.11-new.img',请检...
Message: ata0-0: could not open hard drive image file '30M.sample' 上面这个报错,是因为引导设备默认为硬盘,这里应该换为我们写的boot.img软盘。注释掉下面硬盘这行,打开软盘这行。 boot: floppy #boot: disk Bochs is not compiled with lowlevel sound support. 注释掉配置文件中这行关于声音设备的即可。
4、运行 前提条件 （1）如下这些工具，是否安装了 sudo apt-get install android-tools-adb android-...
Message: ROM: couldn't open ROM image file '/usr/share/bochs/BIOS-bochs-latest' . /usr/share/bochs doesn't have the required files. When I install bochs in the same way on a freshly installed Ubuntu 20.04 LTS under VirtualBox bochs runs fine. /usr/share/bochs does have the required...
Note: I could not find a groupadd, grpadd, addgroup, addgrp, or vigr command, so this is my approach – please let me know if there’s a better way… 3. Create a home directory to contain the all of the user’s home directories ...
Now if I only knew how I could install Win2K on it…. 2002-12-04 9:55 am Anonymous When I’ve tried to use Bochs 1.x, I’ve been bamboozled by how difficult it was to set up and use. If version 2.0 is not easier to use, then it’s going to remain a geek toy no matter...
程序先从ROM中启动，最先启动的部分要实现代码复制功能（把整个ROM代码复制到DDR内存中），并通过LDR指令...
Message: Could not open '/dev/lp0' to write parport1 output 解决办法: 编辑配置文件 parport1: enabled=1, file="/dev/lp0" 改成 parport1: enabled=1, file="parport.out" 或直接在行首加#注释掉。这个是并口设备,一般给打印机用。修改后,会把发往并口的数据写到parport.out里。