一、移植注意点: 将app_drv_fifo和ble_uart_service移植到BackupUpgrade_OTA中,注意头文件包含和路径添加。 将BLE_UART程序中peripheral.c的工程添加进BackupUpgrade_OTA的peripheral.c中。注意重复的功能如参数更新不可以重复添加。因此需要比对peripheral.c的工程后再添加。 将Peripheral_Init中的SimpleProfile_AddService...
我想在SimpleBLEPeripheral工程中实现UART的通信,我参考了这个帖子: www.deyisupport.com/.../83016.aspx 但是我按照帖子中描述的操作,还是不行,当在main中创建UART的任务时,BLE广播帧就看不见了(我怀疑程序已经挂掉了);反之,BLE广播可以被发现。 我用的是CC2640_4X4的芯片。 各位有知道是什么原因的...
I am using the SaBLE-X BLE module from LSR, which is based on the CC2640F128 (5x5). I'm trying to add UART communication, but ran into some issues. The simpleBLEPeripheral example works just fine as is, but when I add UART support the RTOS seems to be crashing (going into an ...
}//端口初始化voidMyUartPortInit(void) { halUARTCfg_t uartConfig; uartConfig.configured= TRUE;//配置与否uartConfig.baudRate = SBP_UART_BR;//波特率uartConfig.flowControl = SBP_UART_FC;//流控制uartConfig.flowControlThreshold =SBP_UART_FC_THRESHOLD; uartConfig.rx.maxBufSize= SBP_UART_RX_BUF_...
[translate] aLet’s listen to the teacher. Stop ___, please! 我们听老师。 停止___,请! [translate] acc2541 4.0 BLE bluetooth to uart transceiver Module Central & Peripheral switching AirLocate cc2541 4.0 BLE bluetooth到uart收发器模块中央&周边开关AirLocate [translate] 英语翻译 ...
1.最开始参考HostTest工程,移植带NPI的串口到SimpleBLEPeripheral中,只要创建UART的任务,程序就直接挂掉。 2.没有办法了,上论坛找帖子,发现了www.deyisupport.com/.../83016.aspx,一步一步按照上面说的做,不带NPI了,看上去很代码很简洁了,但是问题还是没有解决。一创建UART任务,程序就挂掉。