nimble_port_init(); gpio_set_direction(LED_PIN, GPIO_MODE_OUTPUT); ble_svc_gap_device_name_set("BLE-Server"); ble_svc_gap_init(); ble_gatts_count_cfg(gatt_svcs); ble_gatts_add_svcs(gatt_svcs); ble_hs_cfg.store_status_cb = ble_store_util_status_rr; ble_hs_cfg.sync_cb = bl...
GUS_IDX_SVC是首要服务,所以其对应的UUID为ATT_128_PRIMARY_SERVICE; GUS_IDX_TX_CHAR是特性声明,对应的UUID则为ATT_128_CHARACTERISTIC; GUS_IDX_TX_VAL是TX Characteristic特性,所以对应的UUID为我们自定义的UUID; GUS_IDX_TX_CFG为TX Characteristic的CCCD,则其对应的UUID为ATT_128_CLIENT_CHAR_CFG; 其中ATT...
GAP确保了两个蓝牙设备可通过蓝牙技术交换信息,以发现彼此支持的应用程序。不符合任何其他蓝牙配置文件的蓝牙设备必须与GAP符合以确保基本的互操作性和共存。 蓝牙名字修改: 找到GAP实现文件wm_ble_gap.c 在int tls_ble_gap_init(void)函数里面我们很容易的找到了蓝牙名字配置函数: ble_svc_gap_device_name_set(de...
intgatt_svr_init(void){esp_err_tret; ble_svc_gap_init(); ble_svc_gatt_init(); ret = ble_gatts_count_cfg(gatt_svr_svcs);if(ret) {printf("BT NimBLE failed to count GATTS configuration, error code = %x\n", ret);returnret; } ret = ble_gatts_add_svcs(gatt_svr_svcs);if(ret)...
gatt_svr_init(void) { int rc; ble_svc_gap_init(); ble_svc_gatt_init(); ble_svc_ans_init(); rc = ble_gatts_count_cfg(gatt_svr_svcs); if (rc != 0) { return rc; } rc = ble_gatts_add_svcs(gatt_svr_svcs); if (rc != 0) { return rc; } /* Setting a value for the...
2.3.3 在“main.c”文件中取消“MX_UART_Init（void）”的“static”属性 2.3.4 在“app_entry...
开发者ID:A-L-E-X,项目名称:nRF51822-Arduino,代码行数:53,代码来源:btle_gap.cpp 示例4: conn_params_init ▲点赞 1▼ /**@brief Function for initializing the Connection Parameters module. */staticuint32_tconn_params_init(void){ble_conn_params_init_tcp_init = {0}; ...
static void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_tparam) { switch (event) { #ifdef CONFIG_SET_RAW_ADV_DATA case ESP_GAP_BLE_ADV_DATA_RAW_SET_COMPLETE_EVT: adv_config_done &= (~ADV_CONFIG_FLAG); ...
BLE_UUID16_INIT(uuid16))) ^ ../main/myBle.cpp:34:17: note: in expansion of macro 'BLE_UUID16_DECLARE' .uuid = BLE_UUID16_DECLARE(DEVICE_INFO_SERVICE), ^~~~ ../main/myBle.cpp:31:51: note: to match this '{' static const struct ble_gatt_svc_def gat_svcs[] = { ^ ../m...
5、我们来编译并下载程序到nRF54L15DK中会看到程序进入了bluetooth_init 并在串口打印了LOG: 三、使能协议栈 1、接下来,我们需要加入BLE相关的头文件 //Add BLE Library file #include <zephyr/bluetooth/bluetooth.h> #include <zephyr/bluetooth/uuid.h> ...