(Type "shutdown /?" for command line instructions.) 4. Type "manage-bde -status" to check if the hardware test succeeded. NOTE: Encryption will begin after the hardware test succeeds. After you run the command, restart the computer with the recovery key connected to complete the hardware t...
Check the BitLocker statusTo check the BitLocker status of a particular volume, administrators can look at the status of the drive in the BitLocker Control Panel applet, Windows Explorer, manage-bde.exe command-line tool, or Windows PowerShell cmdlets. Each option offers different levels o...
To run it: Open an elevated command prompt Change to %WINDIR%\System32 Enter cscript manage-bde.wsf For the curious, "bde" expands to "BitLocker drive encryption." With no parameters, the output is: Description: Configures BitLocker Drive Encryption on disk volumes. Parameter List: -status Pr...
To help you answer these questions, use the BitLocker command-line tool to view the current configuration and protection mode (for example, manage-bde -status). Scan the event log to find events that help indicate why recovery was initiated (for example, if boot file change occurred). Both ...
Open an administrative Command Prompt window, and type the following command, replacingVolumewith the drive letter of the drive being encrypted:%systemdrive%\Windows\System32\ manage-bde.exe –statusVolume**:**. Verify that encryption has completed. ...
A management script (manage-bde.wsf), which is available with Windows Vista and Windows Server 2008, provides IT administrators with a simple command-line interface to manage and check BitLocker status. This script is written based on the available WMI providers, and can be modified to help bui...
manage-bde -status This command returns the volumes on the target, current encryption status and volume type (operating system or data) for each volume. The following example illustrates enabling BitLocker on a computer without a TPM chip. Before beginning the encryption process you must create the...
To check the status of BitLocker encryption in the system execute the command given below. manage-bde -status Ensure that the results for the required drives(C:, D:, etc) are as follows. Conversion Status :Fully Decrypted Percentage Encrypted :0.0% ...
To check BitLocker status, run “manage-bde -status<OS volume letter:>” at a command prompt as an administrator of the computer. Figure 1Sample output of an operating system volume that is protected by both TPM protector and Recovery Password protector. (Device encryption is not affected by ...
Here, you can also manage, turn on/off BitLocker drive encryption on all drives. manage-bde -statuscommand can also be used to check the status of BitLocker encryption on all hard disk partitions. Also Check: