I find that your TPM is 2.0 version. TPM 2.0 seems require UEFI to be enabled, along with secure boot for TPM to fully function. You could check the link below to get some information. https://softwarearchitect.blog/2017/12/30/the-bitlocker-encryption-key-cannot-be-obtained-from-the-trus...
BitLocker could not be enabled. The BitLocker encryption key cannot be obtained. Verify that the Trusted Platform Module (TPM) is enabled and ownership has been taken. If this computer does not have a TPM, verify that the USB drive is inserted and available. C: was not encrypted...
With these settings configured if the backup fails, BitLocker cannot be enabled, ensuring that administrators will be able to recover BitLocker-protected drives in the organization.When an administrator clears these check boxes, the administrator is allowing a drive to be BitLocker-protected without ...
BitLocker and TPM: other known issues BitLocker cannot encrypt a drive: known issues BitLocker cannot encrypt a drive: known TPM issues BitLocker configuration: known issues BitLocker could not be enabled BitLocker issues troubleshooting BitLocker Network Unlock: known issues BitLo...
Enabled secure boot using UEFI only Any help would be greatly appreciated. All replies (6) Friday, April 12, 2019 5:43 PM Hi, Thank you for your feedback. Try clearing the TPM to an unowned state. After you clear the TPM, the Windows 10 operating system will automatically re-initialize...
A Trusted Platform Module (TPM) chip (version 1.2 or 2.0) that must be unlocked. Windows Recovery Environment (WinRE) must be enabled. The hard disk must be partitioned into an operating system drive formatted with NTFS and a system drive of at least 350 MB must...
Yes, BitLocker can be enabled on an operating system drive without a TPM, if the BIOS or UEFI firmware has the ability to read from a USB flash drive in the boot environment. BitLocker won't unlock the protected drive until BitLocker's own volume master key is first released by either ...
However, it should be noted that TPM is a key carrier with multiple physical security mechanisms. These keys are tied to specific hardware and never get exposed to the operating system or any external applications. Thus, hardware-assisted encryption cannot be deciphered programmatically and is not...
BitLocker and TPM: other known issues BitLocker cannot encrypt a drive: known issues BitLocker cannot encrypt a drive: known TPM issues BitLocker configuration: known issues BitLocker could not be enabled BitLocker issues troubleshooting BitLocker Network Unlock: known issues BitLocker recovery: known issu...
BitLocker cannot use the TPM until it is in the following state: enabled, activated, and owned. When the TPM is in this state and only when it is in this state, all operations are available. The state of the TPM exists independent of the computer’s operating system. Once the TPM is ...